Black 2007 Mazda 3.....some marring that OP won't touch, and the paint seems fairly hard. Do I go with OC, OHC, or the Four Star? A few depper mars here and there, and I would like something that finishes out pretty nicely. Thoughts are GREATLY appreciated, even outside these products. I have a PC, orange, yellow 4 inch CCs pads....
Navigation
Install the app
How to install the app on iOS
Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
More options
Style variation
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Help...OC, OHC, or Four Star MCC??
- Thread starter nonwelder
- Start date
OneQuickGT1 said:Black 2007 Mazda 3.....some marring that OP won't touch, and the paint seems fairly hard. Do I go with OC, OHC, or the Four Star? A few depper mars here and there, and I would like something that finishes out pretty nicely. Thoughts are GREATLY appreciated, even outside these products. I have a PC, orange, yellow 4 inch CCs pads....
try using OC with the orange pad. if it leaves micromarring (i've been able to finish lsp ready with OC/orange pad but that isn't the case all the time), finish it up with OP on a white pad (if you have it)...
OHC is a heavier cut. Some rank it an 8 out of 10. OC is a lighter cut about 5-6 out of 10.
Polish Chart
Polish Chart
VTechFan02
New member
I have heard nothing but good things about all of those products. I only have direct experience with MCC. Does a great job of removing moderate swirls and reducing RDS's in one to two passes. I used it with a 5" LC CSS Yellow on my UDM. I was also amazed at how well it finished down as well. Very nice polish in my opinion. It does dust some though so you may want to give OHC a try.
-Frank
-Frank