Help! Can't seem to fix my cloudy paint

Scottwax

New member
Oh noes!!!111



1099my_626_cloudypaint.jpg




:p



Meguiars #80 Speed Glaze with a cutting pad, #9 Swirl Remover with a polishing pad, NXT wax with a polishing pad, Wolfgang Sealant by hand (two layers), Pinnacle Souveran by hand.
 
I knew something was up when I saw who the author was.



It's so predictable, it's almost boring :D

Nice job :xyxthumbs
 
jrocc1212 said:
Scottwax asking for detailing help. Yeah, right:D Very nice.



:nixweiss Everyone needs help now and then. I have a customer whose kid wanted me to detail his G35 coupe, but after the flatbed brought it by the warehouse today, I am not sure what my plan of attack should be....especially since the kid rolled it 3-4 times, climbed out of the wreckage only to see the car burst into flames about 5 minutes later. There is about a 1' x 2' section of paint still intact on the driver's side rear bumper. I guess I can start there. The rest is a charred mess. The interior will be easy though, nothing left of it! Any suggestion on how to remove the black from the seat springs would be most helpful!



BTW, I took pics, should have them up when I finish the new roll of film. :xyxthumbs
 
I don't think the cloudiness is as bad as that green fungal stuff on the hood. Sorry. I have no suggestions on how to get rid of that. Steel wool might make it go away....:rolleyes:



Scott, it shines so good I even see MY reflection on that hood! How is that...possible????:confused:
 
W O W - Great work as usual. Scott, did you use your PC? When are you going to get a Cyclo? :bow :bow :bow



Ops - I should have read all of the post - my bag.
 
Hey Scott,



I've figured out how to fix that problem. I have made the surface so slippery that the cloud is sliding off. :D



559P080504-9.jpg
 
jfelbab said:
NXT (x2):xyxthumbs



I am not suprised at all. I know some don't care for NXT, but I really like it. Does an excellent job when applied with the PC and a polishing pad.



Great picture, btw! :bow
 
I've been using Pinnacle Paste Glaz on my silver Max and have several coats on there. I applied a coat of Megs NXT to it yesterday morning. i just wanted to see what i would look like.



I was blown away at how wet and shiny it looked. I met some guys last night at the local car hangout. I was asked at least a half dozen times what i had done to my car.



That 's pretty impressive considering the light silver color of my car. :xyxthumbs



Bob
 
Back
Top