Getting a CE Rotary soon - noob question

S

Space_Coyote

New member
I am going to get a Chicago Electric rotary this weekend. I have read some people use a different backing plate, I was thinking about this one:



http://www.autogeek.net/5-inch-rotary-plate.html



I have some buffer marks in the paint from where my nephew tried to polish my black Eclipse. They are white 'c' shaped scratches that turn into these long reflected lines in the sun. They don't catch my fingernail or anything so I'm hoping they will buff out.



What pad/products would you recommend to start out with? All the different colours/manufacturers and product combinations are enough to make a novices head spin!



I was nervous about getting a rotary but after reading here I am more confident. I have my stock hood with the defects (before I switched to a CF one) to practice on.
 
I would start out with either of the following:



Sonus SFX-1 or 2

Menzerna Intensive and Final Polishes

Poorboys SSR 2.5, 2 and 1



For the more aggressive polish, I would use a cutting pad or polishing pad.
 
2nd on the edge 2000. I jsut dont see how the edge pads can fail you in the long run....nothing to worry about except for the foam giving out. And usually its the velco that gives way, or the wrong backing plate digging into the foam. speaking of backing plates, you'll never have to buy another backing plate because there is no backing plate to worry about or velcro to worry about. Just an adaptor that will last forever
 
Thanks for the replies. Has anyone used these?



http://www.autogeek.net/vcpad.html



It says they were developed with LC or something so they sound ok.



Another question. I already have Zaino on my shelf so would what would be the correct steps?



something like:



SSR 2.5 cutting pad

SSR 2.5 polishing

SSR 1 polishing pad

Zaino



Can I get away with just SSR 2.5 & 1? Would I need something in between the SSR and Zaino?



Can you use a rotary with Zaino or is is best by hand?
 
That's where I'm getting mine from. I am (or rather my buddy is) picking it up locally to save the $7.99 shipping and delivery time.



Would I need all 4 Edge pads? It says the white and blue are both for applying waxes and polishes so would I really need both?
 
Blue is for applying final polish stage ( AIO , PO85RD , Glazes )

White is for your final sealant stage such as Klasse SG

Green and the right compound ( Meguiars #80/#83 ) should get the swirls out . Heavier work needs yellow then each pad up the scale to work out the last pad's wear on the finish .

In other words yes get all 4 and teh 5/8 adapter . Better than placing two orders / two shipping if you need another pad
 
Depending on what youre removing with the SSR and what pad you use will determine if you need something else before Zaino .

Zaino application would be best with blue pad if youre doing Z5 , then a final Z5 with white .

Then your z2 or z3 with white pad also ( washed and dried of z5 1st of course )

removed by hand or microfiber bonnet
 
You must log in or register to reply here.
Back
Top