Einszett metallic polish & Klasse AIO

Would I experience any bonding issues or any other problems if I applied Z5 over 1Z MP?



After I used a clay bar to clean the finish on my dark blue metallic vehicle, I thought I might use the MP to remove some of the swirls. Then finish it off with Z5 and a coat of S100.



Thanks in advance.
 
I just top my 1Z Metallic Polish with 1Z Glanz Wax and/or my favourite paste wax.Great stuff!AIO is a superfluous step that probably takes you backwards.
 
Embassy said:
Would I experience any bonding issues or any other problems if I applied Z5 over 1Z MP?



Click to expand...



I've tried to find this out also,from what I've read here it looks like you would.At least do a 50/50 iso/water QD before applying the Zaino to be on the safe side.
 
Thank you for your reply.



Would iso alcohol remove the fillers that were applied with the 1Z Metallic polish?



Bascially, I want to know what I should use to remove some swirl marks and fine scratches before I apply several coats of Z5.



Thanks again.
 
Embassy said:
..Would iso alcohol remove the fillers that were applied with the 1Z Metallic polish?



Bascially, I want to know what I should use to remove some swirl marks and fine scratches before I apply several coats of Z5.
Click to expand...



I dunno, the waxes in MP are pretty sturdy. If *I* were gonna use Zaino, I think I'd go over the MP with Menzerna's FP with a finishing pad, ala Gonzo.



But then I dunno if MP will really remove your marring anyhow. It's AWFULLY mild, but some paints are a lot softer than others.
 
You must log in or register to reply here.
Back
Top