Eagle 1 wax as u dry - similar products?

P

pgp

Member
It was nice out today and I did a quick wash and then I used Eagle 1 wax as u dry. What other spray waxes out there are like this one? Most spray waxes want you to wait for them to dry.
 
You can use Mother's FX Spray Wax while you are drying. I also found Poorboys Spray and Wipe (although not a wax) performs well in a similar fashion while drying.



I'm a big fan of the Eagle One and Mother's as it adds a tremendous pop compared to QD's after a wash and the ease of application while simultaneously drying kills two birds with one stone.



Your towels may get clogged from the Eagle One product over time making them less absorbent. Washing them in hot water with a hint of APC helps to dislodge the wax product from the towel. I do this every few times I use the Eagle One or Mother's and use dedicated towels for them.



You can also dilute the Eagle One 50/50 with distilled water and make a nice QD. Just shake well before mixing.
 
I have been using the Prima Hydro and Malco's nano line aqua wax.They both perform great but the Malco is way cheaper
 
pgp said:
It was nice out today and I did a quick wash and then I used Eagle 1 wax as u dry. What other spray waxes out there are like this one? Most spray waxes want you to wait for them to dry.
Click to expand...



if you want something you can find OTC, get the mothers fx spraywax, it's pretty good stuff ($5.99 at pepboys). i've used the EO1 WAUD and did not care for it...



20224_thumb.jpg
 
Protect All Do it All works extremely well. I have found it to be a better protectant then the DG AW. Plus its very versatile as well......Works well on trim and rubber....
 
a.k.a. Patrick said:
Protect All Do it All works extremely well. I have found it to be a better protectant then the DG AW. Plus its very versatile as well......Works well on trim and rubber....
Click to expand...



Protect All Do It All can be used on a wet surface? Protect All's website doesn't really make that clear. Thanks and Regards,
 
I use Aquawax and FK1 FX-100 for this sort of thing. Used with ONR, I can do a quick wash and wax in under 20 minutes.
 
HRD said:
Protect All Do It All can be used on a wet surface? Protect All's website doesn't really make that clear. Thanks and Regards,
Click to expand...

Absolutely.......One of my favorite drying "tools"....Leaves a Nuba like slick finish, and provides U.V. Protection....
 
You must log in or register to reply here.
Back
Top