does megs nxt layer?

[2000firebird]

can I layer meg's nxt tech wax? or is that just going to remove the previous layer I put on last night. using a black propel pad and pc. also how long should i wait between layers?

thanks

 

[stilez]

I'd say 2 layers is max, then you will just start removing.





Wait 12-24 hrs between coats.

 

[Mad iX]

I find it best to wait 24 hours.

2 layers is optimal, with 3 you won't notice a big difference. After that you're better off maintaining it with the spray wax.

 

[Djmigs]

i agree with the above comments....wait 12-24hrs depending on your loc....and 2coats max and you may want to top it ....to lock in the glass......also remeber nxt does contain cleaning agents.....

 

[TGates]

I remember somebody doing the "marker" test with NXT on here, and it did in fact remove the marker off the top of the washer or dryer. I'm not sure how valid that kind of test is, but it seemed legitimate to me. It has some cleaning agents in it, so really doing more than 2 coats would be a waste, IMO. I would do 2 coats however just to ensure uniform distribution if working by hand, waiting at least 12 hours between coats.

 

[2000firebird]

alright thanks guys, i went with just the two coats. is there any other type of sealant i could put ontop of it?