Do you find ONR completely Mar Free

pingable

New member
This is my 2nd time using the product.

1st time I used 2 sheepskin mitts .



Today, I used 4 mitts per car.



What I'm observing is the *formulation* of ONR and how it does not release dirt from the mitt. After washing the car, I take my mitts back indoors and rinse them in my laundry sink.

I've notice that the dirt in the mitts will not release even in a hot water soak.

I need to use APC, let it dwell on mitts, and then followup with a plastic bristle cleaning brush to *comb it out*.



There is alot of dirt, grime, fine dirt, etc that releases from the mitt *my laundry sink .



Dunno about long term use and how mar-free or much marring the combo will be on my Jet Black car.



Sofar, I think it's great and an incredibly slick waterless wash......but I'm just not sure how gentle it is on the pair fiven my wash media. I may try a grount sponge but I suppose the results are the same.
 
grout sponge release dirt much better than any other washing media . They work great with ONR.



Cheers , Jean Paul
 
chefwong said:
This is my 2nd time using the product.

1st time I used 2 sheepskin mitts .



Today, I used 4 mitts per car.



What I'm observing is the *formulation* of ONR and how it does not release dirt from the mitt. After washing the car, I take my mitts back indoors and rinse them in my laundry sink.

I've notice that the dirt in the mitts will not release even in a hot water soak.

I need to use APC, let it dwell on mitts, and then followup with a plastic bristle cleaning brush to *comb it out*.



There is alot of dirt, grime, fine dirt, etc that releases from the mitt *my laundry sink .



Dunno about long term use and how mar-free or much marring the combo will be on my Jet Black car.



Sofar, I think it's great and an incredibly slick waterless wash......but I'm just not sure how gentle it is on the pair fiven my wash media. I may try a grount sponge but I suppose the results are the same.



You should not have that problem with the grout sponge as it releases all the dirt and grime really well. You might also want to try the sea sponge, it is much softer.
 
Yeah, I tried a grout sponge with ONR 2 weeks ago. After your done your panel, squeeze out the sponge and it releases a lot.
 
It's not the media that is the issue at hand....



It's how ONR and whatever properties it has in encapsulating dirt ties into the media and does not allow it to release cleanly from the media is what I'm observing.



My laundry sink is a white cast iron sink. I can clearly see ~too much grit~ for my taste that is released from my sheepskin mitts ONLY after I wash them with APC.



Prior to APC, they are embedded into the mitt.
 
I use Sonus Concours Buffing Towels as my wash media. Rather than trying to deal with getting the dirt to release, I just keep flipping to a new side of the towel.



YMMV, but that's how I've done QEW and ONR washes for a couple of years now. I might have to give the grout sponge a try, though; always nice to have other options.



Tort
 
I've used both Eurow SHeepskins and GS and find both to result in a mar free finish on my black paint.



It's all in the application. 2 bucket method, hood and top panels before bottoms.



JJ
 
I've been using the Eurow sheepskins with no problem for over 6 months now.



I use the two bucket method and I also pre-soak each panel with QD strength ONR before washing.





So far so good - no marring.
 
At the risk of exciting my good man Junebug, go for the win with a grout sponge!



[EDIT]



I have not used ONR.



I am speaking from my experience with grout sponges and a typical water based car wash. I still use a MF mitt for complex places like the grille but the GS has become my main washing media.



Just wanted to clear this up.




[END OF EDIT]



:)
 
ONR has this effect on almost all wash media that I have used with it. (Chenille, GS, MF, MF Mitt, SS Mitt). Grout sponges are no different. When I use GS I use at least two. When I am finished, depending on how dirty the car was, I rinse out the GS with duragloss 902 in a bucket of hot water. After I let them soak and rinse them out, the water is dark brown/black.



Its very similar on all the wash media that I use. Thats why I think its important to use a few different media for each wash.
 
NSXTASY said:
ONR has this effect on almost all wash media that I have used with it. (Chenille, GS, MF, MF Mitt, SS Mitt). Grout sponges are no different. When I use GS I use at least two. When I am finished, depending on how dirty the car was, I rinse out the GS with duragloss 902 in a bucket of hot water. After I let them soak and rinse them out, the water is dark brown/black.



Its very similar on all the wash media that I use. Thats why I think its important to use a few different media for each wash.



yes ONR has this effect on all media

but I find the GS to release dirt and grit alot better then sheepskin mitt

with a little aggitation in the rinse bucket
 
Ill be trying ONR for the first time before to long and I must say Im nervous. My paint is in fairly good shape with little swirls and I dont want to put more in it. Ill probably be polishing this spring anyway but I still want a good finish through the winter.



Ill probably spray it off outside even if its cold, then pull it into the garage and use ONR. That way there wont be any grit on the paint, just road film. :)



Ive only got one Megs MF mitt and one Sheep Skin mitt. I guess I should buy another sheep skin mitt.. :nixweiss
 
I use several dedicated MF towels as my wash media. I also use a grit guard at the bottom of my bucket to wipe off the MF towel which releases the dirt and grit from the MF towel. I have also never had a problem with marring my finish!
 
Maybe a future version of ONR will release the dirt better. This is a problem, but I haven't tried the famous GS yet.
 
Has anyone done a test using ONR and QEW on the same car, using the same type media to see which releases better? The reason I ask is that I use QEW (I can buy it locally, and I like to support local merchants when I can), with a Eurow mit, and 2 bucket method. I have done so for 4 months now. The grime releases from my mit very well...I have stated before on other threads that my mit is typically so clean after washing a car, that I can use it for 1-2 more washes before I have to clean it. The other weekend, a buddy was watching me use QEW, and he was amazed how dirty the mit would be, and then how clean it looked after wringing it out in the rinse bucket.
 
I myself use ONR with 3 mitts, also does anyone rinse bucket after a wash make a star shape at the bottom with the dirt in there

DSC_0931.jpg
 
Back
Top