Diffrence between SIP and IP

[yugin]

I am a little confused. I've been reading conflicting things, some sources say that SIP has stronger cut (6/10) than IP, others say IP is stronger than SIP. Menzerna chart says that they are the same as far as cut goes. So?

 

[Eisen Hulk]

SIP is for ceramiclear coats, which are typically harder.



IP is better suited for non-ceramiclear coats.



SIP can become a real pain on soft/medium clear coats if you're not careful.

 

[M0nk3y]

SIP is for ceramiclear coats, which are typically harder.



IP is better suited for non-ceramiclear coats.



SIP can become a real pain on soft/medium clear coats if you're not careful.

+1



Do you mean that it will cut too fast, or not finish down good?

 

[Eisen Hulk]

Since it's Ceramiclear rated, it's likely to induce marring on softer clears. You could stick with SIP on a soft/medium clear, but you'd want to possibly try it with a CCS white pad instead of orange.

+1



Do you mean that it will cut too fast, or not finish down good?

 

[Alfisti]

Same cut, but on the appropriate paint types.