togwt
The Old Grey Whistle Test
Before the advent of detailer’s clay it was a common practice to remove paint-overspray with a one-sided razor blade and a surface lubricant or by polishing the surface with a compound / polish and a wool pad
a) Detailer’s clay is essentially a malleable applicator that contains suspended abrasive particles, used with a surface lubricant it aquaplanes across the paint surface and removes surface contaminants by abrasion and then encapsulation by the malleable polymer an was originally formulated to remove paint overspray; it is also useful for removing surface contaminants that have bonded to the paint.
Detailer’s clay was originally formulated to remove paint overspray; it is also useful for removing surface contaminants that have bonded to the paint surface. It gained its reputation as a decontamination method because it was mistakenly believed that it ‘pulled’ brake / rail dust iron particulates from the paint surface. Detailer’s clay contains abrasives that will only shear any brake dust particles leaving what is below the paint surface to remain. Once water and heat (reactivity) is added the corrosion process is started.
.
b) Paint decontamination systems were developed as a method of removing ferrous contamination beyond what can be removed by washing or claying alone. The only way to completely remove sintered (heat fused) ferrous iron particles is with a dedicated decontamination system that opens up the paint's micro pores to release iron particles and to neutralize the caustic compounds that have developed as a result of the particle. In one step, you can eliminate both the cause and its effects. Ongoing damage is immediately stopped and future damage is prevented by completely removing the ferrous particles.
a) Detailer’s clay is essentially a malleable applicator that contains suspended abrasive particles, used with a surface lubricant it aquaplanes across the paint surface and removes surface contaminants by abrasion and then encapsulation by the malleable polymer an was originally formulated to remove paint overspray; it is also useful for removing surface contaminants that have bonded to the paint.
Detailer’s clay was originally formulated to remove paint overspray; it is also useful for removing surface contaminants that have bonded to the paint surface. It gained its reputation as a decontamination method because it was mistakenly believed that it ‘pulled’ brake / rail dust iron particulates from the paint surface. Detailer’s clay contains abrasives that will only shear any brake dust particles leaving what is below the paint surface to remain. Once water and heat (reactivity) is added the corrosion process is started.
.
b) Paint decontamination systems were developed as a method of removing ferrous contamination beyond what can be removed by washing or claying alone. The only way to completely remove sintered (heat fused) ferrous iron particles is with a dedicated decontamination system that opens up the paint's micro pores to release iron particles and to neutralize the caustic compounds that have developed as a result of the particle. In one step, you can eliminate both the cause and its effects. Ongoing damage is immediately stopped and future damage is prevented by completely removing the ferrous particles.
http://www.autopia.org/forum/welcome-greeting-center/] Authors Profile [/url]
