Dark streaks after buffing out

C

cannoli33

New member
Hi, after wiping off the wax residue from using my Porter Cable buffer to apply wax to my car, I noticed that there were dark streaks in certain parts. Wiping with a soft cloth didnt remove them. You have to really look but they were noticeable to me. what would cause those dark streaks? I did wash the wax pad the day before with water. so the pad was still moist. also I had polished and wax by hand a couple of weeks ago I just waxed this time with the P. Cable. COuld leaving the wax on to long before buffing it out cause the problem? By the way the color of my car is a 2001 dark blue metalic.
thank you,
cannoli33
 
Have any pictures??Not sure...usually i see things after I clean the vehicle...dirt and other things were hiding the light scratches and swirls...
jeff
 
Just off the top of my head, you can get streaks from:
Using towels for dressing, then on paint - always keep those towels seperate.
Not removing polish/glaze completely, then waxing over.
Not allowing wax to dry enough (applying too thick so it doesn't dry through easily) before reomoving it.

Try this:
Let the wax dry further, then try wiping again.
QD the car.

Don't worry, nothing is ruined, you just need a tweak in your process.

Hope this helps a bit.
 
Maybe this was the problem

when I waxed with the machine and then buffed it I didnt polish it before hand since I did that a couple of weeks before by hand. Should I polish, and then wax again? Im using Automagic which has been fine for me. I should have buffed out each section at a time rather than let it sit until the whole hood was done to buff it out. I was wiping pretty hard. the weather was average. no direct sun but the hood was warm from driving.
C
 
You must log in or register to reply here.
Back
Top