Buff and shine white pad

[donbeezy]

Geekier site lists the white as finishing pad and autopia lists as polish. What kind of pad is it?

Sent from my iPad using Tapatalk

 

[Mp0wer]

Buff and Shine website says heavy polishing pad

 

[mikejames]

+ 1 heavy polishing pad.

 

[Bunky]

There are two white pads.

There is the polishing pad and a super soft sealant pad. The B&S white pad sold by Cyclo is the super soft one too. I have some.

Most sellers sell the super soft one.

 

[davidc]

And a little more confusing

Which White, Blue, Yellow. I think they should do some re-coloring. I guess the best way is to refer to the description where they were purchased.

Dave

 

[pwaug]

The white 5.5" pad is made of Euro Prepolymer Foam, is firm and is a heavy polishing pad. The Green 5.5" pad is Reticulated Polyester Foam, is softer and is a polishing pad.

The white 4" pad is Reticulated Polyester Foam, very soft and an Ultra Finishing Pad that can be used for applying LSPs.

 

[Bunky]

Which White, Blue, Yellow. I think they should do some re-coloring. I guess the best way is to refer to the description where they were purchased.

Dave

Phil at Detailer's Domain prints the pad purpose on his B&S pads. I asked him why he did not carry the heavy polishing white and he said there was not a significant difference between the white and green to carry both.

 

[donbeezy]

so should I be buying the greens instead of white?


Sent from my iPhone using Tapatalk

 

[davidc]

so should I be buying the greens instead of white?


Sent from my iPhone using Tapatalk

I bought 3 of each and skipped the White because you never know. I just used the green with Collinite 870 (AIO) on fiberglass and then finished with a Red and 885. I may get the White at sometime but what I have seems to work so far.

Dave

 

[pwaug]

so should I be buying the greens instead of white?

I think the white will perform better on harder clear coats and the green on softer clear.