BioKleen Fiberglow

W

WMD-DFW

New member
Not sure how many people use it hear, but its probably my number carpet cleaning product. Especially if you have an extractor, I find that you can even dilute it less than what it says. I use 2oz for every 5gallons and it makes carpet look almost new again.



This was done with traffic lane cleaner as a prespray and no agitation in the back area at all just mixed 2oz of Traffic Lane into my water, its really cheap costing you about 25cents for 2oz when you buy a 5gallon jug



Before

BackBefore.JPG


RearInteriorBefore.JPG


After

InteriorRearAfter.JPG


BackInteriorAfter.JPG
 
About a $1 less for a gallon on ebay from a seller in MI.



I'm about out of ultra pac powder, which I always thought worked pretty good.
 
DitchTehFish said:
Do you use this to pre-treat? Do you only extract with hot water?
Click to expand...



Sorry about that. I got the products wrong.



I have been using dry slurry (powder) in the extractor and ultra pac as the pretreat.



I'm about out of the dry slurry, so will try the fiberglow in my Mytee HP60.



We've been having some painting done and our master bath fully remodeled. Our hallway carpets are taking a beating from the contractors walking back and forth. So as soon as they are done, I will give the fiberglow a workout.
 
DitchTehFish said:
Would Fiber Glow be effective with a heated bissel little green machine?
Click to expand...



I dont see why not, it does foam alittle so you might need an anti foaming agent. With the extractor I use it doesnt matter. Plus you dont have to worry about having to rewash it out because its made to dry on fabrics
 
You must log in or register to reply here.
Back
Top