Bilt Hamber Auto Balm: Quick Review (with pics)

Not an in depth long review just a quickie......



Application method: I did a 2x2 section with a damp applicator pad. My apprentice waited ten seconds and wiped off. The product was very easy to get on and off. VERY thin application was practiced. I did half the vehicle with JUST the residual product that was stuck under the cap.



Obervations: It really made the black pigment of the paint work very rich. It also made the flake POP as you will see below. While the gloss characteristics were like a typical sealant, it also had some of the glow that a nuba usually affords... the look was not sterile as some describe sealants.



The sun was out yesterday while polishing but not today for final details & inspection. I wish the sun was out today so you all could see just how brilliant it looked...





Just to show the surface prep of the vehicle that was being worked on- This was the best sun shot mother nature delivered on this overcast day:

100_8192.jpg




Here is the flake popping like I spoke of earlier:

100_8198.jpg




Misc shots:

100_8194.jpg


100_8195.jpg


100_8203.jpg


100_8209.jpg


100_8216.jpg


100_8218.jpg


100_8220.jpg
 
looks great, i want to try some for some time now. i hear it has good swirl and marring hiding capabilities, how did you find it in that department? THANKS FOR THE REVEIW.
 
blucpe said:
looks great, i want to try some for some time now. i hear it has good swirl and marring hiding capabilities, how did you find it in that department? THANKS FOR THE REVEIW.





Thanks... I polished the swirls out before hand so I wasn't able to test any potential filling this may offer..
 
Is this product generally available in the USA now? I haven't been able to find it have been somewhat "curious" about it.



Thx, and it looks real nice :)
 
tom p. said:
Is this product generally available in the USA now? I haven't been able to find it have been somewhat "curious" about it.



Nope not yet. It currently has to be ordered from the UK. Phil@DetailersDomain was entertaining the idea of of group buy but here was a lack of interest. :aww:



To the OP, what have your experiences been with dirt releasing ability and water spotting. Typical behavior of a sealant or some similarities of 'nubas?
 
its a very good product but I doubt it will appeal to all...



I have used it for about 18 months now and primarily for classics where the paint is too thin and/or precious to machine further, yet it needs swirls hiding. With practiced technique 2 layers will hide a lot of marks and it does add a great wet gloss. Application does take some technique and its not a great beader but it is a quality product for those that want what it can offer :D
 
This is great stuff! I've had it for about a month now, got it for my '02 black Tundra. It swirls if you look at it. It is quite different than anything I've used previously. Use a wet, not damp, wet foam applicator. Just lightly dab it into the jar and it applies very smoothly. Do no more than a 2x2' section and buff off easily to a wet shine. If you let it dry, its like trying to buff off a dried layer of rubber cement. That's the only caveat. Don't let it dry! The shine is outstanding and minor swirls and holos are gone! They say it doesn't bead. It beads, just not Collinite-type beads. Very slick at first, but the slickness diminishes quickly. The shine, however does not diminish. Quite durable, so far. They are supposedly working on a QD+ topper that will bead if you like that. Also bought the APC and clay. This is good quality stuff, I hope someone will distribute in the US.
 
tom p. said:
Is this product generally available in the USA now? I haven't been able to find it have been somewhat "curious" about it.



Thx, and it looks real nice :)





shipping doesn't look bad :

Bilt-Hamber



am I missing some hidden charge?
 
I ordered from Rubbish Boys...it was at my front door in 3 days! Blew my mind! I've ordered stuff from Texas, right next door, and had it take 3X longer. Great service!
 
pootoo12000 said:
I ordered from Rubbish Boys...it was at my front door in 3 days! Blew my mind! I've ordered stuff from Texas, right next door, and had it take 3X longer. Great service!



Yep.. I also order from Ben and the service and shipping speed is incredible... ken from Autowerkes (I linked it above) provides just as great of service... Both triple A vendors!
 
This is a great product...i have had it on my truck for a month now. It looks really nice...it poured down rain last night and i walked outside this morning and my truck looks clean still..i didnt look at beating but there arent standing waterspots all over my truck, which means it sheets water well..i was mega impressed with how it still looks even after the rain
 
jordanrossbell said:
This is a great product...i have had it on my truck for a month now. It looks really nice...it poured down rain last night and i walked outside this morning and my truck looks clean still..i didnt look at beating but there arent standing waterspots all over my truck, which means it sheets water well..i was mega impressed with how it still looks even after the rain



Did you have to order from the UK, or do we have it here in the US
 
Back
Top