Best way to apply Spray Wax

B

Bioman

New member
I've had pretty bad success with spray waxes in the past(ie. NXT Spray Wax). I was at Kragen the other day picking up some Eagle 1 Spray Detailer and I came across Reflections Spray Wax. I like the original wax and thought I might give this a try.



So, I usually take a meguiars foam pad and spray some wax on the panels and then rub the wax in. I let it haze and then tried to wipe it off. I know the original wax is super easy to wipe off, even if you put a lot on. Well, when I tried to wipe off the spray wax is seemed like it was glued on there. I needed to spray some qd to loosen it up. This was a lot harder than just regular waxing and I thought spray detailers where suppose to be quick.



My question: What is the best was to get a thin layer using spray wax?
 
I know this doesn't answer your question, but I've never used a spray wax before, and never seen a real need for it. Most QDs contain some type of protectants, whether it be in the form of carnauba, polymers, acrylics, silicones, or something else. You could always just use a user-friendly QD in place of a spray wax.

I use S&G every day or two from April-October because it's so so easy to use, and it adds protectants as well.
 
White95Max said:
I know this doesn't answer your question, but I've never used a spray wax before, and never seen a real need for it. Most QDs contain some type of protectants, whether it be in the form of carnauba, polymers, acrylics, silicones, or something else. You could always just use a user-friendly QD in place of a spray wax.

I use S&G every day or two from April-October because it's so so easy to use, and it adds protectants as well.
Click to expand...

Ya, I just picked it up to give it a try. I thought it would be easier to use than regular waxing, but I found it even more difficult. I also use QD's but they only work well up to a point. If you want that "just waxed" look, you have to wax. I was hoping spray wax was something I could use quickly, so I wouldn't have to wax as often. Might give OCW a try, because I heard it's really easy.
 
tomee said:
speaking of spray waxes, how much product do you need to cover a panel using OCW?
Click to expand...

I'm not sure, because Spray Waxes are a different consistency then regular wax. I sprayed a panel and the volume of wax that comes out is probably 4x as much I would normally use with regular wax. I thought this was fine because spray wax is a little more watery(ie. thinner) than regular wax. It's also hard to get a thin consistency. These are just my experiences with Mother's Reflections.
 
Spray waxes are booster waxes. If you want quick and easy go pick up Mother FX's or E1 Nano Spray. It applies just like a QD.
 
Good thread...I just picked up a gallon of Meguiars #34 yesterday at a detail supply shop near me...I was wondering if this adds any protection? I can use this for removing polish residue, and to clean off light dust, fingerprints, and streaks correct? I know it's not a waterless wash, but sometimes before I leave in the morning I would like to give it a quick wipedown and was wondering if #34 can do this for me until I get FK#425 Thanks - sorry to hi-jack the thread.
 
Chan said:
Spray waxes are booster waxes. If you want quick and easy go pick up Mother FX's or E1 Nano Spray. It applies just like a QD.
Click to expand...



so your saying OCW, 4star, AJett and CJett are just boosters and cannot be used as an LSP???



i know i use ocw as an lsp as well as many others here do.
 
Joshua312 said:
Good thread...I just picked up a gallon of Meguiars #34 yesterday at a detail supply shop near me...I was wondering if this adds any protection? I can use this for removing polish residue, and to clean off light dust, fingerprints, and streaks correct? I know it's not a waterless wash, but sometimes before I leave in the morning I would like to give it a quick wipedown and was wondering if #34 can do this for me until I get FK#425 Thanks - sorry to hi-jack the thread.
Click to expand...



I really like #34. It has light cleaning ability, leaves a nice shine, not much protection though if any. It's excellent for in-between polishes/glazes and LSPs. Also great for after washes.
 
Joshua312 said:
Good thread...I just picked up a gallon of Meguiars #34 yesterday at a detail supply shop near me...I was wondering if this adds any protection? I can use this for removing polish residue, and to clean off light dust, fingerprints, and streaks correct? I know it's not a waterless wash, but sometimes before I leave in the morning I would like to give it a quick wipedown and was wondering if #34 can do this for me until I get FK#425 Thanks - sorry to hi-jack the thread.
Click to expand...



#34 is a great QD when used correctly. It *can* be tough on your LSP (such as Souveran for example) but it is absolutely the best I have tried for removing polish and using it as a clay lube, using it on wheels, etc. I don't think it leaves much behind. It's super easy to work with, but if you're looking for something to use as the very last touch after waxing, I'd look elsewhere. JMO.
 
I actually like using the NXT Tech Booster Spray Wax. I have to say that it is much more likable once you get the technique down. I spray onto a foam pad and then apply to a cool finish. It must be applied so thin as to be almost invisible. I use this after every other wash and it adds about 20 minutes to my wash time. It leaves the finish looking freshly detailed and very slick. The slickness keeps dirt from getting a grip so the car is easier to wash. DSFDF
 
Hines said:
so your saying OCW, 4star, AJett and CJett are just boosters and cannot be used as an LSP???



i know i use ocw as an lsp as well as many others here do.
Click to expand...



They can be LSP, but in my opinion they're just to do a quick wax instead of putting another layer of liquid or paste wax.
 
dont let the fact that its comming from a spray bottle fool you ;).



i can only speak for use of OCW as it is a good standalone LSP, and from what i hear AJett and CJett are much better.......cant wait to try them!!!
 
RP-350Z said:
I'm just curious, but why would one use a QD after they wash their car?
Click to expand...



For myself just to add alittle pop to the paint, and I'm just lazy that day to do anything else, LOL
 
In reply to the original question.



Make sure you have shaken the wax perfectly. This is a MUST! If the wax looks more like a clear liquid with particles in suspension, it wasn't properly shaken, and that way it is a bear to remove



As I wrote on the mothers forums (thread already linked) the key to apply reflections spray wax is wet car / towel. In fact, fine tuning of the method described is using a WW to dry most of the car, leaving the car barely wet, then go to town with the spray wax. That way is even faster and easier.



I have complained quite loudly in the mothers forum about the application method. Hopefully they will make it a true spray and wipe wax. I guess the program manager of the product, in a whim, decided it HAD to be direct competition to NXT booster, and that included application method..... big mistake.



Using the method of wet car / towel, wax spreads thinner and removal is quite easy (though not as easy as reflections advanced car wax) The look however, is worth the additional effort.





Alex
 
Alex, have you ever tried diluting Reflections SW? Maybe that would thin it out and eliminate the need for the car to be wet?
 
You must log in or register to reply here.
Back
Top