Best AIO for Correction

SR77

New member
There seems to be alot(can't keep track of all of them) of AIOs now on the market with some of them leaving a sealant behind for longer protection, but which one(s) have the best ability for correction or swirl removal, not hiding. I am looking for a good one step to speed up details that people either don't want or need a multi step polish. Plus I can use it on my vehicles too as a quick touch up. Have ColorX on hand which says it leaves a polymer behind but doesn't seem to do much for swirl correction though, although i haven't tried it with a rotary yet. So which one of the many AIOs out there will tackle swirls the best. thanks
 
Swirl removal with a AIO is going to be dependant on pad and the hardness of the clearcoat. I know that ZAIO will last 3 months on a daily driver.
 
I like Hi temp "HT-69" Paint perfection glaze

it has there light cut mixed with a protecant that last a few months for me
 
I like Poli-Seal a lot for an AIO that does some correction. It works especially well when used with an orange LC pad. Prime Strong on an orange pad is OK as well.
 
Frito Bandito said:
I like Poli-Seal a lot for an AIO that does some correction. It works especially well when used with an orange LC pad. Prime Strong on an orange pad is OK as well.



x2, i like Poli-Seal also. It leaves a nice finish on top of the minor correction it performs.
 
lest we forget :



product_M6601.jpg
 
My 3 favorites XMT 360,ZAIO,PB's Polish with Sealant They all are pad dependent and I know of no fillers with 360.
 
Prime Acrylic has some correction ability and sure leaves a brilliant OP free finish on some cars and life like reflections.



It's just mastering it by rotary so it won't hologram that's the hard part
 
#66 is my favorite. It's what I use on all the one step jobs I get. And on some one step polish jobs that don't come totally clean after polishing. It does have pretty good cut if you work it long enough. Not quite like #80 as Meg's chart states but pretty close.
 
Back
Top