Applying Poorboy's Natty's Blue Wax with PC?

K

kakl

New member
Hey everyone.

I want to wax my car today and was wondering how do you guys apply your Natty's Blue?

I usually apply it by hand but since I've been having a PC 7424, I want to try applying it with the PC.

How would I do this? Do I just wet the pad a little and then try to put some of the paste wax on the pad?

I'd be using an Edge 2000 DA White Finishing Pad to apply it. What would be the appropriate speed to apply the wax?

Any tips or suggestions? Thanks.
 
if you have a finishing pad that would be best. Spray the pad with a little bit of S+W or some water from a spray bottle then pop the nb out of the tub and rub it on the pad until you think you have enough and then spread it out nice and thin. Sorry but i dont have a clue on what speed to put the PC at i would guess 1 or 2. Somebody help me out please.

I do it by hand.
 
I use my PC and a black LC pad and, like Pockets said, I pop it out of the container and apply it to the pad. I use speed 3.5 - 4. REAL THIN LAYERS!!! If you don't, buffing's going to be a chore.
 
You must log in or register to reply here.
Back
Top