Any suggestions for buffing out a FedEx Truck?

A

asudevil

New member
Hello All!! This is my first post, so let me start out by saying how much I enjoy the forum. I was asked by a FedEx driver/owner to detail his truck and get the scratches out of the side of it. Do you have any suggestions on products and what I would have to do in order to restore the paint? I was planning on using Meguiar's Heavy Cut Cleaner on it along with a Meguiar's foam cutting pad on my rotary buffer. Then if needed I will hit it with a foam finishing pad. Am I on the right track? Or does anyone have experience and can help me out? Thanks for your time!
 
I don't know but I believe the graphics are vinyl not paint so I wouldn't use anything strong or it can get damaged. I'd probably only use a cleaner wax on the graphics.
 
Do you have experience with a rotary? Heavy paint corrections?



Let us know a little bit more about YOU, so we can give advice that will be within your reach.
 
Thanks for all your suggestions so far. As for my experience with a rotary buffer I do not have too much. I have used an orbital more than I have used a rotary. I did one truck allready using an orbital buffer with a foam pad and medium cut wax. It helped a little bit but the scratches were still there. It did not show any indications of harming the viynl with that combo. Thank you in advance for you help!
 
You must log in or register to reply here.
Back
Top