AIO/SG(x2)/S100 vs. VM/EX/CMW vs. Zaino on black

I

imported_fireberd350

New member
These two combo's (twins and vm/ex)are the top 2 of my choices as a result of months of board monitoring. I would like to hear from some people that maybe have used both and can give an un-biased comparision.



I deal with a lot of black cars, 3 of them are mine, and need to find a combo that far prevails over the rest. I am currently using a 1ZPP/NXT combo with so-so results. I noticed on my previously Zaino'd car that the 1ZPP/NXT combo darkened it up a bit, too the point that I don't like it (too dark). I think I'm going to save the NXT for the lighter colored cars for now.



I am also going to switch to a stronger swirl remover in DACP to replace the 1ZPP. The 1Z is not cutting it on the black paint (pun intended) So whatever I use will be used over the DACP.



I have heard nothing but good things about the Klasse Twins and the VM/EX combo. I am also a Caranuba virgin so I'm curious to try that as a topper on whatever I use.



Also, I already have some zaino. Personally I think it's time for a change but if the previous will not give me better results should I just stick with the Zaino?



Thanks in advance, Steve.
 
As far as I know, CMW has cleaners in it, so it will remove VM + EX.



I don't think you'll get a much better look than the Klasse twins topped with S100 ;)
 
CMW is a thick liquid with barely any cleaners.



My vote goes for VM/EX/CMW. I did VM/EX-P/CMW on my girlfriend's Imola Red Saab. It proved to have extraordinary depth and wetness. A great combo IMO. With the substitution of EX, the look will be even deeper, a plus on black :xyxthumbs
 
CMW doesn't have cleaners to remove the EX/VM. Regular Moose wax is a clener Wax, but CMW is not in that category.
 
Scott P is right you might be getting confused with Moose Wax, a cleaner wax. Doesn't EX then CMW seem a little redundant?? I though they were very similiar with CMW having a little edge with the "wetness" factor. I would think only 1 is needed to get the job done.
 
Thanks for the quick responses....much appreciated.



Durability is not really a concern since i love detailing my rides but from what I have read the VM/EX combo is extremely easy to use while the SG takes some skill. The ease of use may have a factor in my decision...



any other insights from anyone?
 
CMW no matter what will have a VERY slight cleaning ability since it is a liquid = more solvent content, but it will not remove your EX. Just pointing that out.
 
I love the look off VM and CMW but have not yet tried it CMW over EX-P or NXT, I have stuck to P21s and #16 over the top, is CMW fine to use over NXT or EX?



Cheers



Rich
 
I've also heard of people using Natty's over EX. Which would combo do you think would bring better results, I'm going for the wettest, slickest, deepest, look possible w/o spending tons on pinnacle souveran:

1. DACP / VM / EX / CMW

2. DACP / VM / EX / Natty's

3. DACP / AIO / SG(x2) / S100

4. Feel free to add any other personal favorite combos for black
 
I'd go with VM/CMW or EX w/Carnauba. Both will look very wet. You can top either with Natty's for an even wetter look or pop for Pinnacle Souveran...although Souveran didn't do much for my black Mazda, however, it rocks on a customer's Rolls and any black Mercedes.
 
I have a Blue Cobra and I love the VM/EX-P/CMW combo! I have 2 coats of EX-P, then I topped it with CMW, and the wetness really came out! This past week I put another coat of EX-P over the CMW, and it gave it a great look, I don't know if EX-P removed the CMW, but I am very happy with the look!!

752004114809PM40121.jpg


752004114103PM76531.jpg


628200434532PM87811.jpg


628200432143PM66041.jpg
 
You must log in or register to reply here.
Back
Top