AIO after Menzerna
- Thread starter Mirakaski
- Start date
imported_CBX Carl
New member
I would say IMHO AIO is necessary prior to the application of SG regardless of the current condition of the finish.
from what I understand, Menzerna does not contain fillers or oils, so it seems that you could go directly to SG, but I have not tried it. I know what you are saying after the IP & FP, the finish looks great, I have however used UPP after Menzerna with no problem, but of course it is different than SG.
Kev,
Glad to hear the Menzerna worked well. I highly recommend you use AIO on your red car...I just did the same on my red car after similar polishing results and I thought I could skip the step. I didn't and I think the results were great.
I'd recomend you use jimwh's Klasse instructions in the "hall of fame." I had a small issue with SG and a little hazing but it was because I hurried so I'd also recommend you stick to the 1 hour dry and 24 hour cure times with a little more/less depending on the humidity.
My write up is here:
http://www.autopia.org/forums/showthread.php?threadid=26623
Good luck and post some pics when you're finished.
Russ
Glad to hear the Menzerna worked well. I highly recommend you use AIO on your red car...I just did the same on my red car after similar polishing results and I thought I could skip the step. I didn't and I think the results were great.
I'd recomend you use jimwh's Klasse instructions in the "hall of fame." I had a small issue with SG and a little hazing but it was because I hurried so I'd also recommend you stick to the 1 hour dry and 24 hour cure times with a little more/less depending on the humidity.
My write up is here:
http://www.autopia.org/forums/showthread.php?threadid=26623
Good luck and post some pics when you're finished.
Russ