4* UPP questions?
- Thread starter hd-nut
- Start date
TW85
Evidence Seeker
Apply to the entire car, fully dry," and remove. I have let it sit as little as 15 minutes and as long as nearly 8 hours and I have never noticed a difference.
As for application, PC with a finishing pad gives the most uniform coverage IMO.
As for application, PC with a finishing pad gives the most uniform coverage IMO.
joyriide1113
There is no cure!
definately wanna go with a pc for the first coat. just my opinion. a lot fo guys suggest atleast 45 minutes, even tho the bottle says 15 minutes. i personally ebcause of fear have never let it sit under 30 minutes. no how u apply it and let sit, it will be a breeze to remove.
goodluck
goodluck
Apply to the entire vehicle with a dry applicator, apply very thin, let dry till it wipes off with no effort whasoever. I usually wait 30 minutes, but 15 minutes seems to be a common wait time for many people.
The PC with a finishing pad works great, but by hand is no effort either. Stop by Auto-Zone and pick up one of the foam applicators that have the grip formed in them.
Using a sealant over a glaze such as Adam's doesn't seem like a good idea to me. It might create a bonding problem which would reduce the longevity of the UPP.
I'm not familiar with the Adam's BSG, but you might want to get some more opinions on the bonding question.
Charles
The PC with a finishing pad works great, but by hand is no effort either. Stop by Auto-Zone and pick up one of the foam applicators that have the grip formed in them.
Using a sealant over a glaze such as Adam's doesn't seem like a good idea to me. It might create a bonding problem which would reduce the longevity of the UPP.
I'm not familiar with the Adam's BSG, but you might want to get some more opinions on the bonding question.
Charles
I have applied it both ways and let it sit for 15 minutes and 1 hour. It is very user friendly stuff IMO. Apply very thin and wait 24 hours between coats. I would definately advocate 2 or 3 coats, I've had great results that way. I am amazed at how easy it is to remove and how very little dust there is.
B
Boss_429
Guest
I would also skip the BSG.... you don't now what affect it will have on the bond of UPP. A lot of people (including myself) have had great success using AIO prior to UPP. I would suspect that the best product before UPP would be UPC, as it is made to work with the UPP.hd-nut said: