3M IHG -> Klasse AIO thought...

E

ExplorerXLT95

New member
Ok, so I am told that using 3M IHG then Klasse AIO afterwards is an ok thing to do. However, I have some moderate swirl marks. If I were to just 3M IHG then follow it by the Klasse twins, would they swirl marks and whatnot show through??



3M SMR did not remove the swirl marks (but I only applied it once, relatively lightly). Would 3M Perfect-It II Light Rubbing Compound: Fine Cut be a better idea, then follow it with the SMR, then the IHG, then the Klasse twins and Souveran??
 
I feel the Klasse AIO will remove the IHG.....so no real reason to apply it......



Sg may hide very minor swirls but why not remove them prior to applying any sealant or wax....Prep work is the key to a great look.



As for which Abrasive to use.....Start least aggressive and work from there...sometimes two applications of a the least aggresive works....



HTH
 
What GMN said :up



I'd try the SMR another time (or two) depending how much swirling you have. Then skip the IHG since it's mostly just fillers and stuff that Klasse won't like.
 
You must log in or register to reply here.
Back
Top