2013 blk chry 300 ton of swirls

[joe18741]

Car purchased July,bad finish,dealer sent out to be detailed, car oK
6 months later car has ton of deep swirls
Tried 3m perfect 3000 machine polish with LC hydro tangerine
Did not do job
New to detailing want to do job right d'ont want to fill swirls
Have mothers pro machine glaze
Need help thanks joe using rotary

 

[Orinda Auto Detail]

Hi Joe, My suggestion since you have little to no experience is don't try to remove machine swirls with a rotary. These marks were probably inflicted by a rotary by someone who was lacking in experience. You should look into hiring a pro which im sure if you tell us where your at someone here could find one for you. Or investing in something like
Blackfire Porter Cable Swirl Remover Kit

It will be much more user friendly to get the results you want. It honestly took me over 1000 hours of rotary use before I could finish down a car with any swirls left over and even now sometimes I have a hard time. Hope this helps.

P.S. that black fire kits ROCKS!

 

[Todd@RUPES]

Hi Joe, My suggestion since you have little to no experience is don't try to remove machine swirls with a rotary. These marks were probably inflicted by a rotary by someone who was lacking in experience. You should look into hiring a pro which im sure if you tell us where your at someone here could find one for you. Or investing in something like
Blackfire Porter Cable Swirl Remover Kit

It will be much more user friendly to get the results you want. It honestly took me over 1000 hours of rotary use before I could finish down a car with any swirls left over and even now sometimes I have a hard time. Hope this helps.

P.S. that black fire kits ROCKS!

Well I would have responded, but since Joe did, I would go with his advice!

 

[joe18741]

My intention is to go into detailing as a business that is why I join this forum and hope to get advice not a referral

 

[mnehls86]

My intention is to go into detailing as a business that is why I join this forum and hope to get advice not a referral

I would say what Joe stated was solid advice. You didn't state your exact intentions of wanting to start a business in the original post so look past the "take it to a professional" tip but don't overlook the other good information he posted. I don't use a rotary but if I wanted to start I would be looking to put in some time with someone who does know and have a few different practice panels.

Hi Joe, My suggestion since you have little to no experience is don't try to remove machine swirls with a rotary. These marks were probably inflicted by a rotary by someone who was lacking in experience. Or investing in something like
Blackfire Porter Cable Swirl Remover Kit
It will be much more user friendly to get the results you want. It honestly took me over 1000 hours of rotary use before I could finish down a car with any swirls left over and even now sometimes I have a hard time. Hope this helps.

P.S. that black fire kits ROCKS!