2011 Mazda Speed3
- Thread starter TonyTahoe
- Start date
Brad B
New member
My buddy has two, with a Jag up on each. In fact they are called Car Buddy's, I believe. They hold each car about 5.5 feet in the air and work quite well. They do take up a bit of space. (4 posts) and you have to have the overhead space for the garage door or a roll-up garage door like a warehouse has. (that's what he installed special.) It's slow taking cars up and down but it works.
This is my first write up so take it easy on me. Wanted to only do a one step with M205 and a white LC Flat pad, but I think my clear is harder than I expected. The car wasnt bad to start with so I didnt want to go aggressive so I just polished it up and protected it.
Products used
Wash: Optimum Car Wash
Clay & Lube: BF Clay Bar/ ONR Lube
Wheels: P21s Gel with various mitts and tools
Tires & Fender Wells: Optimum Opti-Clean/ Various Brushes/ BF Tire Gel
Polishing: M205 on a White LC Flat Pad/ Flex & PC
LSP: BFWD on a LC Gold CCS Pad
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
[/IMG]
Let me know what you guys think. Thanks
Products used
Wash: Optimum Car Wash
Clay & Lube: BF Clay Bar/ ONR Lube
Wheels: P21s Gel with various mitts and tools
Tires & Fender Wells: Optimum Opti-Clean/ Various Brushes/ BF Tire Gel
Polishing: M205 on a White LC Flat Pad/ Flex & PC
LSP: BFWD on a LC Gold CCS Pad
Let me know what you guys think. Thanks
Came out looking very nice. A lot of the swirls are gone.
I used the same products on my car but had to use the M105 and M205 then the BF Gloss Enhancing Polish and BFWD. Check it out:
http://truthindetailing.com/Forum/showthread.php?t=6439
I used the same products on my car but had to use the M105 and M205 then the BF Gloss Enhancing Polish and BFWD. Check it out:
http://truthindetailing.com/Forum/showthread.php?t=6439
Todd@RUPES
Just a regular guy
Speed3's rule (IMO).
It looks great!
It looks great!
bmw5541
New member
Nice results!:rockon:
sweet detail
this is going to sound silly but that last mazda 3 i did i had a rough time with carpet..... any tips or tricks.. i just had to brush and vac and brush and vac and brush and vac to get like half of the stuff out... got a 6.5 wet/dry vac clean filters etc.
Thanxs
Will,
this is going to sound silly but that last mazda 3 i did i had a rough time with carpet..... any tips or tricks.. i just had to brush and vac and brush and vac and brush and vac to get like half of the stuff out... got a 6.5 wet/dry vac clean filters etc.
Thanxs
Will,
To be honest Ive only had to clean my interior twice now and Ive only had to vacum the driver side. I dont really get the inside to dirty, but the couple times Ive cleaned it I did have trouble with the carpet more the floor mats. I have the metro vac n blow and it seems to do a good job. Better than my shop vac.