4u2nvinmtl
New member
This is a regular maintenance wash/detail for me…
Products used:
· 4 buckets with grit guards (Reno Depot for wheels and Canadian tire for paint)
· 2 wash mitts (green for wheels and yellow for paint)
· Karcher Pressure washer
· Foam Lance
· Hose with quick connects and quick shut off valves
· 6x Eagle Edgeless Microfibers (orange-wax)
· 3x WW towels (1 large 2 small)
· 2x Glass Microfibers (light blue)
· 8x Edgeless Microfibers (white-door jambs)
· 12x Misc. Microfibers to dry the wheels (green, and blue)
· Mr. Pink Soap (4oz in two buckers and in foam lance)
· Optimum No Rinse (one cap in paint wash bucket)
· Stoner Invisible Glass
· Ultimate Waterless Wash plus(+) for door jambs and drying aid
· Extreme Shine Oil Based Sprayable Dressing
· Finish Kare 1000P
· Mothers Metal Polish
· Wheel Woolley’s
· Detailing Brush
· Foam applicators (wheels, trim, LSP)
I detailed my Jeep less than a week ago but it’s daily driven and the weather has been bad. My last detail I did the interior and trim/rubber, and applied a 2[SUP]nd[/SUP] coat of FK-1000P.
Before pictures:
My wash process:
Pressure washer rinse
Foam lance (dwell 5mins)
Flood rinse (inspect)
2 bucket wash the wheels, exhaust, and door jambs
2 bucket wash (4oz Mr. Pink + 1 cap of ONR, yellow wash mitt)
Flood rinse
Dry (inspect)
Apply LSP in areas needing
Some of the products (went back in to get more stuff):
Foam dwelling:
Dirty wash mitt:
Clean:
Rinse (pre 2 bucket):
Post two bucket wheel wash (rise bucket):
Post two bucket paint wash (rise bucket):
Products used:
· 4 buckets with grit guards (Reno Depot for wheels and Canadian tire for paint)
· 2 wash mitts (green for wheels and yellow for paint)
· Karcher Pressure washer
· Foam Lance
· Hose with quick connects and quick shut off valves
· 6x Eagle Edgeless Microfibers (orange-wax)
· 3x WW towels (1 large 2 small)
· 2x Glass Microfibers (light blue)
· 8x Edgeless Microfibers (white-door jambs)
· 12x Misc. Microfibers to dry the wheels (green, and blue)
· Mr. Pink Soap (4oz in two buckers and in foam lance)
· Optimum No Rinse (one cap in paint wash bucket)
· Stoner Invisible Glass
· Ultimate Waterless Wash plus(+) for door jambs and drying aid
· Extreme Shine Oil Based Sprayable Dressing
· Finish Kare 1000P
· Mothers Metal Polish
· Wheel Woolley’s
· Detailing Brush
· Foam applicators (wheels, trim, LSP)
I detailed my Jeep less than a week ago but it’s daily driven and the weather has been bad. My last detail I did the interior and trim/rubber, and applied a 2[SUP]nd[/SUP] coat of FK-1000P.
Before pictures:
My wash process:
Pressure washer rinse
Foam lance (dwell 5mins)
Flood rinse (inspect)
2 bucket wash the wheels, exhaust, and door jambs
2 bucket wash (4oz Mr. Pink + 1 cap of ONR, yellow wash mitt)
Flood rinse
Dry (inspect)
Apply LSP in areas needing
Some of the products (went back in to get more stuff):
Foam dwelling:
Dirty wash mitt:
Clean:
Rinse (pre 2 bucket):
Post two bucket wheel wash (rise bucket):
Post two bucket paint wash (rise bucket):
