2000 HD F-150 18,000mi. How's it look so far?

[bobkomas]

Up to this point

I've dawn washed, mothers clay bar and used PC to SEC it...

Next step will be AIW and SG with PC then S100 by hand...



Comments welcome:

 

[Pats300zx]

Very nice...:up

 

[cpaddock]

Nice looking ride:up . Those are some cool pics.



Is the weather rough there in RI?

 

[bobkomas]

Thanks,

The weather's rough in RI only about 5 months of the year

Water here has lots of stuff added to it also which makes me hate washing because the spots are a Bit@@ to get off (still working on that "perfect drying" technique, but might try the QEW next time, I just picked up a bottle of it.)

 

[SlvrChrm03Max]

:xyxthumbs Nice shine and nice truck !



Bob

 

[imported_Simon]

That is one nice lookin' truck! Nice and wet looking too. Good job:up

 

[imported_Tony]

Your truck looks great.



I dont think you can use SG with a PC. From what I understand SG has to set for at least an hour ( I wait overnight) before buffing. I dont think SG will bond using the PC method.



Anyway what do I know?



Good luck

 

[2wheelsx2]

You can use the PC to spread the SG. However, I personally wouldn't. It's just a apply and let set for an hour. No buffing required. The foam pad would soak up and waste a lot of product too.

 

[bobkomas]

okay, I may have gotten it mixed up with the AIW then, I've read that people use the PC for that. That's okay, right?

 

[2wheelsx2]

AIO may be used with the PC, especially if you are not using a polishing step. It's cleaners work very well at removing oxidation.



I normally use it after a polishing step to clean off oils and fillers prior to applying SG, so I do it by hand.



Just make sure you use the "less is more" principle when applying both Klasse products and you can't go wrong.



And remember to allow SG to cure for at least 24 hours per coat.