autoconcierge
New member
Here is the completed job by "Bob'n Bing Inc. The teasers were posted earlier but here is the fruit of our labor(by three former GI guys) we had 96 hours plus into the car as every surface from paint to trim and all of the suspension had fifteen years of built up crud.Special thanks to Richie and Mark Zamzow for helping me thru this last two weeks of a busy schedule.
Here is the car in the beginning.
The front bumper had been re-painted the week previous but needed finishing as it had sand scratches and holos.
Customer requested we not wash the car conventionally, so out came my "Low pressure washer" which sprays a fine mist as opposed to getting the car really wet.
Richie claying the finish.
Start of the very long process of correcting the paint. Some 50/50 pics.
On the previous pics of the wing we had sanded the finish then corrected, here is the other side sanded down.
50/50 of the re-sprayed bumper, which needed a little help........
More areas that were sanded.
"The Bing" removing the wing.
Wing removed to allow us to properly correct all paint finish areas.
Trunk area before correction.
50/50 after compounding.
Hood sanded.
After correction.
Richie taping an area for me to sand.
Here is the car in the beginning.
The front bumper had been re-painted the week previous but needed finishing as it had sand scratches and holos.
Customer requested we not wash the car conventionally, so out came my "Low pressure washer" which sprays a fine mist as opposed to getting the car really wet.
Richie claying the finish.
Start of the very long process of correcting the paint. Some 50/50 pics.
On the previous pics of the wing we had sanded the finish then corrected, here is the other side sanded down.
50/50 of the re-sprayed bumper, which needed a little help........
More areas that were sanded.
"The Bing" removing the wing.
Wing removed to allow us to properly correct all paint finish areas.
Trunk area before correction.
50/50 after compounding.
Hood sanded.
After correction.
Richie taping an area for me to sand.
