Barry Theal
New member
ok guys well first off let me say sorry for not posting more i have been so busy detailing im working 12-15 hours a day and business has really been through the roof.
my work load has lead me to hire a parttimer, who is working out well. no more interiors for me !!!! wooooooooohoooo
Process
Decontamination
all wheels- attack acid
door jambs- ardex new wave
motor- ardex new wave
tires and wheel wells- ardex new wave
Dawn was appllied to remove all old wax, dirt, then the car was rinced
Clay bar- Claymore medium grade
Then a rinse with dawn again, then dried
exterior
Tools- dewalt rotary buffer, porter cable orbital polisher, karcher pressure washer
chemicals - 3m rubbing compound white scheigal wool pad 2inch pile
m105 edge blue wool pad
m105 edgel doubled sided yellow foam bad
Ipa wipe down- "rubbing alcohol and water 50/50 mix
at this point the car was rinsed to remove all dusting which incurred from the compound
m205 porter cable blue edge pad
ipa wipe down
now i applied boss gloss body shop safe polmer sealent with porter cable and white edge pad
the next day i applied a coat of colinites 845 insulator wax!
Interior - was scrubbed with ardex new wave diluted 1 to ten air compressor to blow out all cracks along with a mixture of steamer and so on.
ok some before shots!
as you can see this car had a few random isolated deep scratches and swirls
my work load has lead me to hire a parttimer, who is working out well. no more interiors for me !!!! wooooooooohoooo
Process
Decontamination
all wheels- attack acid
door jambs- ardex new wave
motor- ardex new wave
tires and wheel wells- ardex new wave
Dawn was appllied to remove all old wax, dirt, then the car was rinced
Clay bar- Claymore medium grade
Then a rinse with dawn again, then dried
exterior
Tools- dewalt rotary buffer, porter cable orbital polisher, karcher pressure washer

chemicals - 3m rubbing compound white scheigal wool pad 2inch pile
m105 edge blue wool pad
m105 edgel doubled sided yellow foam bad
Ipa wipe down- "rubbing alcohol and water 50/50 mix
at this point the car was rinsed to remove all dusting which incurred from the compound
m205 porter cable blue edge pad
ipa wipe down
now i applied boss gloss body shop safe polmer sealent with porter cable and white edge pad
the next day i applied a coat of colinites 845 insulator wax!
Interior - was scrubbed with ardex new wave diluted 1 to ten air compressor to blow out all cracks along with a mixture of steamer and so on.
ok some before shots!
















as you can see this car had a few random isolated deep scratches and swirls