Correcting Curb Damage Scratches to Paint?

iamalexander408

iamalexander408

New member
Hey everyone!

I'm looking for assistance on how to fix this scratch I made on my just OptiCoated car :[

Would this work? To possibly remove most of it?
[ame=http://www.amazon.com/Turtle-Wax-T-415-Premium-Compound/dp/B000NMDFNY/ref=zg_bs_15718371_4]Amazon.com: Turtle Wax T-415 Premium Grade Rubbing Compound - 18 oz.: Automotive[/ame]

eqqsg9.jpg

o0tc1g.jpg

wwj8m0.jpg

ka0ivc.jpg
 
Unfortunately, the scratches are too deep and under the clearcoat and paint, a rubbing compound or polish will not fix it. Sorry to see this, especially after an opti-coat.
Only thing to fix is re-paint

For what its worth, the car looks very clean!
 
On 2nd look, it looks as if the white is paint transfer from the curb (assuming the curb was painted)? Is this Correct?

If so, a compound can help remove most of that. But other spots I see are too deep.
 
Robertj34 said:
On 2nd look, it looks as if the white is paint transfer from the curb (assuming the curb was painted)? Is this Correct?

If so, a compound can help remove most of that. But other spots I see are too deep.
Click to expand...

Yeah I believe the curb was white (the portion with house numbers). I'm debating to just compound it to remove over 50% of it. Then maybe get a front under body spoiler to cover the rest up haha.

Would the shop ask to paint the entire bumper if I brought it to them?
 
Kinda looks like transfer of paint from the concrete, some heavy clay or something to strip like a paint cleaner might help. There was a threa don here or AG, where a guy solved this exact problem, gotta find it.....hmmm
 
It looks to me like you have a combination of both. Paint transfer and damage. I would polish with something like Ultimate Compound or M105 and see what you are left with. You probably won't be able to remove it all, but if you get all the paint removed it should still look much better than what it currently does. It does look like you possibly have some damage that is to deep to polish out.
 
bswombaugh said:
It looks to me like you have a combination of both. Paint transfer and damage. I would polish with something like Ultimate Compound or M105 and see what you are left with. You probably won't be able to remove it all, but if you get all the paint removed it should still look much better than what it currently does. It does look like you possibly have some damage that is to deep to polish out.
Click to expand...

Agree the top portion looks deep, however there are good folks out there at repairing plastic bumpers and repainting....the bottom portion looks like all paint transfer to me, should be easy to get off with various products. I'd try an agressive clay or something like Auto Finesse obliTARate if you have something like that.
 
If this for sure white curb paint transfer for most of the area, why not find out what that paint is made of and get the appropriate paint thinner to remove it?

If the scratches were not so deep, certainly compound on a Rotary would make short work of this, and would probably still make short work of it..

The only issue is the deeper scratches - if your rub product into them, you have to then remove it back out..

They sell all kinds of tar removers, right ? Perhaps one might have the right product/s that will easily remove the paint...

I would only use several Q tips to try first and only a little tiny bit on a spot to test, where it wont be as noticeable if something goes bad..

I know not everyone likes to hear this, but I have had incredible success using that little metal can of Goof Off professional sold in the Paint Dept., at Home Depot..
Again, only with a Q tip - a little tiny test spot, apply the product, rub lightly, wipe if off with a clean paper towel or a clean soft cloth, and observe the result.. Do you see Black Paint on the white Q Tip ? If yes, Stop using this product.. :)

Yes, the Auto Body Shop would want to either try to sand down the scratches if not too deep, prime them to fill anything left, block sand with a guide coat, and paint the whole thing over, unless this paint is able to be spotted in, like in the old days...

Sorry this had to happen to you.. :(
Dan F
 
cleanmycorolla said:
Kinda looks like transfer of paint from the concrete, some heavy clay or something to strip like a paint cleaner might help. There was a threa don here or AG, where a guy solved this exact problem, gotta find it.....hmmm
Click to expand...

I think I remember that thread! Wasn't a white or silver car? And it was really bad? Because if it's the same I'm thinking of, he did a hell of a job.

Now, I'm trying to find it.
 
You must log in or register to reply here.
Back
Top