Drying (blower or towels)?

M

mrshanno

New member
For a home wash/dry, is it okay to use a dedicated leaf blower like Toro to dry?Or is it better to (wash) and dry using quality microfiber drying towels?
 

Ron is correct.

I will share my journey.

When I started out I used some waffle weave towels. It worked well and got the job done. I then got a deal on an electic leaf blower and started using it in conjunction with my WW towels. Over time and quite a bit of research I stepped up to the MasterBlaster blower to replace my leaf blower. The amount of air it moves is quite a bit more while also being heated and filtered making it safer. I know use my MasterBlaster to do the majority of the drying and then follow up with a WW towel to get in any cracks or crevices that still hold water.

It may be a little expensive and overkill but I love it. It also allows me to use less WW towels, so I only need to have a few on hand when I am wash a fleet of cars. As I like to have and use a new clean towel on each car.

 
Thanks guys...I'm not quite ready to step up to a Master Blaster...I wonder if an electric Toro leaf blower will be ok or does it need a filter for the air?
 
Personally I would stay away from something like a leaf blower. It could pick up debris in the air then blast them against your paint. I know its minor but I always like to play it on the safe side.

I would stick to using fresh clean microfiber or pick up a device that filters the air like the Metro sidekick, Air Force or Master Blaster.

The side kick is great as it is small, does not break the bank, and can be used to blast all the areas around lights, door handles, mirrors etc. this is a great companion to microfiber.
 
Both, and in the order you've written them. Done it this way for over a decade and it works, pure and simple. I use a gasoline blower. Any worries are totally unfounded.
 
it all depends too..well if you had lots of time and want to do a through detailing then i would go for blower it will go through each crevasse. I usually dont get that much of a time so i use towel. But also blower would take time too
 
I guess I have used MF towels for drying. I never thought of using my leaf blower until I read it on here late November. I have a Shop Vac brand that is a dual purpose vacuum/blower in one and I am going to try it next spring when it warms up, it has a filter on it so it should work without worry. I have read about the possibility of sucking up dirt and blowing it on the paint but never heard of dirt floating around in the air that would be heavy enough to cause damage and don't think dust will damage paint either although you may suck up a fly but that should only splat the paint provided he is not smeared all over blades, LOL! I just can't see spending well over $300 just to blow a car off, but then I have spent that kind of money on dumber things. I think owning the Master Blaster would be a different story if I was taking care of a fleet of cars but I can only afford one so just can't see shelling out that kind of dough. JMO.

Dean. :lol2:
 
I did not have much luck with the leaf blower but recently saw a mod to one that shorten the exhaust so it can be more precise in direction.
 
I always use the leaf blower. It is dedicated to the car and I bought an attachment specifically drying the car. Works great. But as others have said you still need to follow up spots with a good WW towel.
 
I use a Toro electric leaf blower followed with an Adams Great White towel. Someone mentioned an attachment for specifically drying a car. Where would you find this??
 
I still use a water blade just to move the major area's of water off the car.
Next I use the master blaster to blow off all excess an get all the cracks an crevices.
After that it's time for the waffle weave towel to get the rest.
 
Can you use a leaf blower? Sure.

Is it better then a Metro? No way IMO.

When you use a leaf blower you are blowing unfiltered air over the paint at a high rate of speed. Any "damage" is not likely to be noticeable for years, but you are sand blasting the paint to some degree. If you drive your car on an expressway you will notice the damage of grit moving of your car at 70-80 mph after a few months. The paint becomes pitted and blasted. Now imagine that air moving at 180-225 mph.

I would surmise that you are causing damage to your paint, although it will likely take some time and before it becomes noticeable. Once I used the Master Blaster I fell in love with it and the way it works. The fact that I know I am protecting my paint from extra damage (considering how much it faces due to just regular use) is a bonus.
 
bicycle said:
Thanks. I'll do that!
Click to expand...

NO!!!!!!!!!!!!!!!!!

That thing is hard plastic! Seriously I wouldn't...

People...

You get the results you pay for, honestly. If you decide to pay for some korny plastic pos, don't expect it to last long, work as good as the pro stuff and work like the best. I got a metro blaster off eBay for half the price used a couple of times. I've had it for over a year and it still works flawless. Do it once, Do it right. Somethings are worth trying but other things especially mechanical equipment, try an stick with the proven stuff, you won't regret it.
 
Not touching the finish or at least as little as possible is important if your goal is not to impart damage or defects due to drying with a cloth.

I bought a new Troy-Bilt electric leaf blower from Lowe's specifically for drying cars and trucks. For $50.00 it was money well spent and works wonders, seriously!

Blower.jpg



During the Christmas season of 2012 I succumb to the tremendous and unrelenting pressure of this forum and bought a Master Blaster.... and a sale along with free shipping allowed me to have one delivered to me for $281 vs the regular $399.... maybe that was it!! :lol: :lol:


Package_zps8d9a5863.jpg
 
BobbyG said:
Not touching the finish or at least as little as possible is important if your goal is not to impart damage or defects due to drying with a cloth.

I bought a new Troy-Bilt electric leaf blower from Lowe's specifically for drying cars and trucks. For $50.00 it was money well spent and works wonders, seriously!

Blower.jpg



During the Christmas season of 2012 I succumb to the tremendous and unrelenting pressure of this forum and bought a Master Blaster.... and a sale along with free shipping allowed me to have one delivered to me for $281 vs the regular $399.... maybe that was it!! :lol: :lol:


Package_zps8d9a5863.jpg
Click to expand...

Tell us how you like the new MB compared to the old Leaf Blower? I personally use a LB, due to reading on here and then follow up with my drying towels.
 
If you have a decent wax on your car, and you take the hose nozzle off, and gently run the water at low pressure over the vehicle, more that 90% of the water just beads up and runs off. What is left you can blot off with a Kleenex.
I exaggerate a bit, but not much. In my opinion leaf blowers are for leaves. MY neighbors would think I am an idiot, not to mention leaf blower noise is annoying.
 
You must log in or register to reply here.
Back
Top