BLACKFIRE All N One All Purpose Cleaner- BRAND NEW PRODUCT!!!

[Todd@RUPES]

BLACKFIRE All N One All Purpose Cleaner

BLACKFIRE's newest multi-surface All Purpose Cleaner could have just as easily been named an Everything N One. Our chemists worked with several experts in different textile industries to develop this amazingly versatile cleaner. Simply dilute to the needed strength and clean.

Instructions

Full Strength: Bugs & Tar, Engines, Tires, Tree Sap, Wax Removal from trim, Wheels, Wheel Wells
Diluted 4 parts water with 1 part APC: Carpet & Upholstery, Leather, Textured Plastic, Vinyl
Alternative uses: Carpet & Upholstery Shampoo, Microfiber Pre-Soak, Paint Stripping Agent


Full Strength Instructions

Bug Remains

Rinse area first to remove loose dirt and soiling. Note: BLACKFIRE All N One is recommended for use a 1:4 dilution on painted surfaces. When removing embedded bug remains or stubborn tar, always attempt to use a diluted solution first. When using undiluted, only apply to a wet surface and test an inconspicuous spot first.

If Bug remains are fresh simply mist BLACKFIRE All N One All Purpose Cleaner on to the bug soiled areas and all to dwell for 30 seconds to 1 minute. Wash normally and rinse clean with water. If you are washing the entire vehicle do this area last to avoid scratching the rest of the vehicle with the removed bug particulate. If the Bug remains have had a chance to harden or are have been on the paint for a long time, spray BLACKFIRE All N All Purpose Cleaner liberally over the area and allow to dwell for 90 seconds to 2 minutes. Gently agitate the solution with a soft microfiber cloth in small circles to soften and remove existing bug remains.

Wash area with soap and water and apply a fresh coat of sealant or wax.

Tar Residue and Tree Sap

Wash area first.

Spray areas of stubborn tar with BLACKFIRE All N One All Purpose Cleaner and allow to dwell between 30 seconds and two minutes. Mist onto a microfiber towel as well.

Agitate with a soft microfiber towel gently by working in tiny circles. Apply additional BLACKFIRE All N One All Purpose Cleaner if needed until tar is fully removed.

PIC

Rinse thoroughly then rewash area if needed and apply a fresh coat of wax or sealant.

Engines

Engine cleaning should only be done if you are familiar with the various parts of an engine and take care to avoid direct water spray on sensitive areas. Damage can occur. Cover sensitive areas of the engine accordingly including the alternator, electrical connections, air intake, sensors, and ignition systems. The engine should be cool to the touch.

Spray BLACKFIRE All N One All Purpose Cleaner liberally over the engine bay. Saturate areas of heavy grease build up and allow to dwell for 90 seconds to 2 minutes.

Agitate areas of heavy soiling with a brush.

Rinse thoroughly. Make sure to avoid spraying water directly on sensitive parts.

Remove as much water as possible by use forced air or with absorbent multi-purpose microfiber towels.

Remove any materials used to protect sensitive parts and tart engine and allow to warm up to operating temperature.

 

[Todd@RUPES]

Tires

BLACKFIRE All N One All Purpose Cleaner will remove stubborn break dust from rubber tires with out browning them. You can rinse tires first with water, but on heavily soiled tires spray on to a dry tire to avoid dilution. Spray BLACKFIRE All Purpose Cleaner directly on to the tire and begin to scrub with Cobra Flex Foam Tire Scrubber Pad or tire brush immediately. Rinse quickly, being sure to avoid allowing the cleaner to dry on the tire.

On heavily soiled tires or tires with an excessive build up of previous dressing scrub with a Cobra Flex Foam Tire Scrubber Pad to break up excessive grime. Rinse the tire and the Scrubber Pad. Clean the tire on additional time to make sure all build up is removed and the tire is clean.

Wax Removal From Trim

Wash and clean area first to remove dirt.

Mist BLACKFIRE All N One All Purpose Cleaner directly onto a soft brush such as Cobra Nylon Brush.

Agitate area by scrubbing lightly until residue is removed.

Rinse thoroughly and rewash if necessary. If it is interior trim wipe clean with a soft Cobra microfiber towel.

Wheels

Make sure wheels are cool to the touch. Rinse with a forceful water spray to remove as much loose soiling as possible. Spray BLACKFIRE All N One All Purpose Cleaner directly on to the wheel, starting at the bottom and working upward in overlapping sweeps. Make sure to spray the inner wheel barrels and brake caliper as well.

Agitate the wheel face and spokes with a microfiber cloth, wash mitt, or Montana Boar's Hair Wheel Brush.

Clean the behind the spokes and inner wheel barrels with a Daytona Speedmaster Wheel Brush or Wheel Woolies.

Rinse wheel thoroughly to flush away solution.

Wheel Wells

Rinse with forceful water to remove any loose soiling.

Spray BLACKFIRE All N One All Purpose Cleaner directly on to the wheel well and allow to dwell for 30 seconds to 2 minutes. Wash area with a wash mitt or sponge. To access hard to reach areas use the appropriate sized Wheel Woolie Brush.

Rinse thoroughly.

Diluted Instructions.

How to Dilute

Dilute BLACKFIRE All N One All Purpose Cleaner with 4 parts water to 1 part cleaner. Use a measuring cup or graduated spray bottle.

Add water first to avoid foaming for more accurate results.

Then add the appropriate amount of BLACKFIRE All N One All Purpose Cleaner

Carpet & Upholstery

Vacuum thoroughly to remove any loose soiling. BLACKFIRE All N One is effective at spot cleaning carpets & upholstery. Because BLACKFIRE All N One All Purpose Cleaner removes with minimal flushing it is not necessary to use water to remove residue, although it is good practice when using any All Purpose Cleaner.

Mist a microfiber towel or microfiber applicator pad with diluted BLACKFIRE All N One All Purpose Cleaner. BLACKFIRE All N One is effective at spot cleaning carpets & upholstery.

Lightly scrub the area.

Blot area dry with a Cobra microfiber towel.

 

[Todd@RUPES]

Leather, Vinyl, & Textured Plastic

BLACKFIRE All N One All Purpose Cleaner is formulated to be as effective as professional cleaners. We recommend testing a small inconspicuous spot first to test colorfastness in case of damaged leather or leather re-dye.

Clean leather, vinyl, and plastic by misting the product directly onto to the surface or onto a microfiber applicator pad.

or

Work a section at a time by lightly wiping. If more aggressive cleaning is needed use the microfiber applicator to agitate the surface by using a little more pressure.

To efficiently clean extreme soiling or heavily textured surfaces use a Natural Horse Hair Upholstery Brush or a Vinyl & Leather Scrub Brush.

Wipe surfaces clean with a Cobra Micro Fiber Towel. Unlike some all-purpose and interior cleaners, BLACKFIRE All N One All Purpose Cleaner can be wiped away with out flushing with water. Gently wipe dry and move on to the next section. However you can mist the area with water and wipe with a fresh Cobra microfiber towel to ensure all residues are fully removed.

Alternative Uses

Carpet & Upholstery Shampoo

BLACKFIRE All N One All Purpose Cleaner can be used as a carpet and upholstery shampoo in most extraction machines. Add 1 ounce per two gallons of water.

It can also be used to shampoo floor mats. Start by removing the floor mats and vacuum thoroughly to remove all loose dirt and grime.

Spray diluted 4:1 BLACKFIRE All N One over the floor mat until it is saturated.

Brush carpet using a carpet brush such as the Natural Tampico Upholstery & Carpet Scrub Brush.

Place or hold the floor mats in a position so that the water can run down the surface. Spray with forceful water until the water running out of the mats is completely clean.

Hang up to allow water to run out. Vacuum with a wet vacuum if available and allow to air dry completely.

Microfiber Pre-Soak

Dilute 1 ounce of BLACKFIRE All N One All Purpose Cleaner per 2 gallons of water in a bucket.

Allow heavily soiled microfibers to soak for 30 minutes prior to washing with BLACKFIRE Microfiber Cleaner & Restorer.

PIC

Paint Stripping Agent

“Stripping the paint” means removing existing waxes, sealants, or polishing oils. BLACKFIRE All N One All Purpose Cleaner is extremely effective when used in this manner. Simply add 1 ounce of BLACKFIRE All N One All Purpose Cleaner to 4 gallons of your normal wash solution. Wash and dry as normal.

 

[Todd@RUPES]

Questions and comments welcome!

 

[Blacktruckowner]

I'm putting this on my next order list, never thought to try on leather. Can you get this by the gallon.

 

[classofshine]

Looking forward to this one. My only hope is that it is priced inline with other APCs that are of quality. I realize BF is more of a boutique product, so it may be priced out of my range for an APC. Looks to do a fantastic job though.

 

[DHCrocks]

great pictures and ideas on how to use it. I got one more, how to clean out your wallet with all these new BF products I will have to purchase.

 

[rzatch]

Another great review Todd. This had to take awhile to put together with all those pictures. This looks to be a very versatile product and is a must have on the shelf.

 

[Todd@RUPES]

Yes extremely versatile, looking forward to the reviews!

 

[Dr Oldz]

I hate to disagree with you on this one, Todd. I just used it on my tires and wheels at 3:1. No need to use straight IMO. I am extremely shocked at how well it cleaned at 3:1. I really expected nothing much at 3:1 but what I got was squeaky clean. :bigups

 

[rzatch]

Cool this confirms that it is not only good stuff but also economical at the same time.

 

[rider9195]

When pre-soaking at 1 oz. to four gallons in a wash bucket does the cleaner make the towels lose their softness after washing and drying? Sometimes I use a similar technique with heavily soiled towels and use another All Purpose Cleaner. After you wash and dry the towels the fibers aren't soft anymore.

 

[CT3]

Thanks for the write up Todd. I like the versatility. Using it to strip my lsp's is a plus.

 

[bmw5541]

Very nice review Todd.

In your opinion, how does this compare to Opt. Power Clean?

 

[TroyScherer]

Wow, great write up Todd!!! This stuff looks so versital and safe for almost anything. If the cleaning power is that high it could be a runaway hit!!!

 

[classofshine]

Very nice review Todd.

In your opinion, how does this compare to Opt. Power Clean?

Todd is just providing information on these products, were are going to have to wait for more independent reviews before we can get that information.

Which I respect and completely understand Todd!

I didnt what to seem like I was being a dick about it.:autopia:

 

[wendell jarvis]

This looks like a great all in one product..........very cool......and versatile

 

[Reality33]

Could this be the long awaited rival to my sprayer of TAW? I need to try this stuff!

 

[Todd@RUPES]

When pre-soaking at 1 oz. to four gallons in a wash bucket does the cleaner make the towels lose their softness after washing and drying? Sometimes I use a similar technique with heavily soiled towels and use another All Purpose Cleaner. After you wash and dry the towels the fibers aren't soft anymore.

No, it will rinse out completely clean!

Very nice review Todd.

In your opinion, how does this compare to Opt. Power Clean?

I'm 100% avoiding direct comparisons for a number of reasons. I think you will see a lot of comparisons between the two products. Power Clean is AMAZING, so to be mentioned in the same sentence as it (as I think it will be) would be so awesome. This is BLACKFIRE's take on an APC and I think a lot of people are going to be really happy with it.

 

[Todd@RUPES]

I hate to disagree with you on this one, Todd. I just used it on my tires and wheels at 3:1. No need to use straight IMO. I am extremely shocked at how well it cleaned at 3:1. I really expected nothing much at 3:1 but what I got was squeaky clean. :bigups

I actually like disagreements if they are constructive! I saw your write-up :yourrock and I'm glad you are pleased. I have used it as far diluted as 10:1 for bug removal and it just took those suckers right off.