Prospective Detail

alex530

New member
After some time of neglect, my Accord is in need of a complete detail. I'm listing what I plan on doing and wanted to get some feedback if others recommend different products, techniques, tips, etc. I will be doing this all by hand.

Interior:
Vacuum carpets, upholstery, floor mats, trunk, seats
Clean and condition leather with Lexol
Detail clean dash with 303 and mf towel
Treat floor mats with Folex, brush, and microfiber towel.

Exterior:
Clean wheels with chemical guys and wheel brushes
Wash with Jeffs Werkstatt Autobody Wash with lambswool mitt using 2 bucket method
Clean door and trunk jambs with poorboys spray and wipe
Dry With waffle weave microfiber towel after final rinse
Clean all interior and exterior glass with Stoner's invisible glass
Clay with Auto Magic clay bar
Apply Jeffs Werkstatt Prime: Strong with foam applicator pad and buff with microfiber
Apply 2 coats of Acrylic Jett: Trigger with microfiber towel and with 30 minutes between layers
Dress Tires with Stoner's Tire Dressing
Treat windshield cowl and trim with 303 protectant and mf applicator pad
 
Everything is fine.

If you wanna add more, Polish and seal your wheels, dress your fenders, detail engine, detail trunk jams along with gas cap.

Good luck.
 
After some time of neglect, my Accord is in need of a complete detail. I'm listing what I plan on doing and wanted to get some feedback if others recommend different products, techniques, tips, etc. I will be doing this all by hand.

Interior:
Vacuum carpets, upholstery, floor mats, trunk, seats
Clean and condition leather with Lexol
Detail clean dash with 303 and mf towel
Treat floor mats with Folex, brush, and microfiber towel.

Exterior:
Clean wheels with chemical guys and wheel brushes
Wash with Jeffs Werkstatt Autobody Wash with lambswool mitt using 2 bucket method
Clean door and trunk jambs with poorboys spray and wipe
Dry With waffle weave microfiber towel after final rinse
Clean all interior and exterior glass with Stoner's invisible glass
Clay with Auto Magic clay bar
Apply Jeffs Werkstatt Prime: Strong with foam applicator pad and buff with microfiber
Apply 2 coats of Acrylic Jett: Trigger with microfiber towel and with 30 minutes between layers
Dress Tires with Stoner's Tire Dressing
Treat windshield cowl and trim with 303 protectant and mf applicator pad

Welcome to the forum its a great place to learn...from what I see you have a good selection of product...My suggestion is that you use the search feature for questions you have that's a good starting point..and then read, read, read!

Product is about 10% application is 90% so read up about the process of application your results will be better in the end
 
Back
Top