![PRND[S]](/data/avatars/m/105/105760.jpg?1727445786){kind=avatar}
PRND[S]
New member
I searched for the picture in Merlin`s post and found the gun on Amazon: http://a.co/5k3ZJqH
Review: Poorboy`s World Super Slick & Foam For Foam Gun or Foam Cannon
- Thread starter Merlin
- Start date
512detail
New member
`PRND[S said:
I prefer to buy locally personally (unless its Autopia or Poorboys or Polish Angel- they can have my money-haha)
TheMeanGreen
New member
I will be honest, right now I have an older Greenworks 1550psi unit, I LOVE me a 30 - 40 degree tip. However, that angle and pressure/gpm doesn`t get me the desired cleaning results. YMMV.
mobiledynamics
New member
What is the manuf. recommended dilution rate into and standard 34-36 oz lance bottle
How is the lubricity of the soap compared to what woud you consider your 1st/2nd top tier soap
----
I googled it. Seems they recommend 2 oz per 6-8 oz of water. For a typical foam lance bottle, that`s about 8 oz of product. I generally have not used no more than 4 oz max per full lance bottle, and generally only use 1/2 on average (16 oz) of diluted solution in the lance.
How is the lubricity of the soap compared to what woud you consider your 1st/2nd top tier soap
----
I googled it. Seems they recommend 2 oz per 6-8 oz of water. For a typical foam lance bottle, that`s about 8 oz of product. I generally have not used no more than 4 oz max per full lance bottle, and generally only use 1/2 on average (16 oz) of diluted solution in the lance.
Poorboy
Founder Poorboy's World
you only need 2 oz per car .. you do not need to fill the bottle unless you are doing multiple vehicles .. 2oz did a full size van
briarpatch
New member
Finally got to use this in my foam gun today. Put in about 3 oz with about 9 oz water in a 32oz (AutoGeek) foam gun. Gotta say, I`m pretty impressed. It`s right there, if not slightly better than, McKees Extreme Foam soap, and you can get 32 oz of this stuff for a couple dollars more than 16oz of the McKees. It rinsed clean, and felt slicker than any I`ve used, including Griots Brilliant Shine, McKees, CG Mr Pink, and Meguiars Gold Class. As far as cleaning power...well, that`s tough to judge. I used it on my daughter`s car, and it rarely gets very dirty.
As a side note, this is the first Poorboys product I`ve used. If it`s any indication of the quality of their stuff, I will likely be taking another look at their lineup.
As a side note, this is the first Poorboys product I`ve used. If it`s any indication of the quality of their stuff, I will likely be taking another look at their lineup.
Merlin
A Miracle Detailing
`PRND[S said:
I use the white tip that comes with the smaller gun (above link) to "rinse" the soap off.
Be careful with the the black "potato cutter" tip that comes with the PW. (pic lower right)
It can cause damage! However, I will admit, I have successfully used it cleaning wheels.
Review: Poorboy`s World Super Slick & Foam For Foam Gun or Foam Cannon
Sent from my iPhone using Tapatalk
The peel of your paint part is definitely not true about some gas pressure washers. I have a Ryobi 2800 PSI 2.3 GPM gas pressure washer and its 100% safe on paint, as long as you use the right tips and common sense. MUCH faster for rinsing cars and removing grime compared to electric pressure washers.
Sent from my iPhone using Tapatalk
Merlin
A Miracle Detailing
Actually, what I was getting at is that you don`t need a powerful gas pressure washer to get great results from Poorboy`s World Super Slick & Foam For Foam Gun or Foam Cannon.
The little guy I use is easy to use, "safe", small, and stores on the shelf. If you need a pressure washer to do driveways, sidewalks etc. then the little guy may not be your best choice.
The only thing I use my Ryobi 1,600 PSI 1.2-GPM Electric Pressure Washer for is washing cars.
Look at the tip he`s using. It`s a 0 degree tip. That makes a HUGE difference from using a 40 degree or even 25.
Also, what PSI is that pressure washer?
Sent from my iPhone using Tapatalk
Merlin
A Miracle Detailing
I don`t know...but I thought you`d get a kick out of stripping paint of a Vette with a PW. (GRIN)
Re: Review: Poorboy`s World Super Slick & Foam Pre-Soak For Foam Gun or Foam Cannon
I have a basic "foam gun" basically small bottle (about 32oz) attached to the gun portion using hose
Pressure. It`s "eh" but was free. I`ve been using the Chemical Guy`s Honeydew Soap. How does the Poor Boy`s soap compare?
Sent from my iPhone using Tapatalk
I have a basic "foam gun" basically small bottle (about 32oz) attached to the gun portion using hose
Pressure. It`s "eh" but was free. I`ve been using the Chemical Guy`s Honeydew Soap. How does the Poor Boy`s soap compare?
Sent from my iPhone using Tapatalk
briarpatch
New member
Re: Review: Poorboy`s World Super Slick & Foam Pre-Soak For Foam Gun or Foam Cannon
will let you know....I just got some of the Honeydew Snow Foam
will let you know....I just got some of the Honeydew Snow Foam