PA Flake + Zirkon

512detail

New member
Had to do something about the car. On way home tonight I hit it with coin op high pressure rinse and drove down highway and when I got home I inspected it and the cosmic v2 and csl+exo areas were clean. my wax only sides held a little residue but nothing bad

enter n914 sprayed liberally for presoak
f15bc05e390cc540b3095a92c9299946.jpg


enter Polish Angel Flake, 1/2 oz in 1 gal warm tap water and some micros which almost soaked up the gallon

see my previous review for my thoughts...

http://www.autopia.org/forums/produ...bservations.html?highlight=polish+angel+flake

this is on my wax only side btw, so pardon some of the swirls under there that i havent gotten around to fixing yet

rw was drying on there and i had to use a drying aid...

c5daf19407436d2d0572a15cd5f5a0fc.jpg


if only I had something good :)

enter Gold Zirkon
145bd7a6e66ddcfabff0cb7ad7f09077.jpg


now this is where we may disagree but I applied it generously

why? because I wanted to dial up the shine...i just recently single handedly stripped myself of the best looking black challenger crown so I am a little pissed to say the least....but I will worry about getting that back later

sprayed on...
231a19e87f385382781afbbf0cd68179.jpg


96279740e880c016b1d173c903d149ea.jpg

its kind of finicky when spraying full blasts

985cda49c41709a46ce8cb8f9d0a3317.jpg


more flake!!!` I mean I can`t seem to sell this as a LSP so it`s just gonna go bad, right? :)



0b63b4298cd466416bfef3855fe4e7fc.jpg


bf232b8d4c5f5fa05ee7a74193495ebb.jpg


eb9360fe857f193e52715edfcab747d3.jpg


d6e5998bedcdd6dce57a48148d05e1cd.jpg


837f16277b9be78c10f2bdb37c6e10b6.jpg


bab95178d0a26b8c73264ad9c68b3e57.jpg


dc59ef0302a459f3f6da02a1b5f2ab2d.jpg


4b881d06c84a5e78a52fe593a45749c4.jpg


enter 8am not much sun...

34f6d0a5e8abdde509136e31bcd776ac.jpg


dee0e60d386abd4a710547ff099c23d2.jpg

flake rw on wheels too

c742d99a34ff96ae790335bbc8c604b5.jpg


15be4442969ff09963d7b0c44cbb5d84.jpg


eac7c7d146f849f170d287f3c54a7d8b.jpg


ebf24709ce2fe2babb00e794dad813d1.jpg


5d80ffb5e072cbb61a438b03f2640291.jpg


21165dc2fa0f484b5b138e608af76716.jpg


d70bf67a2411d85e65565b582b1c4520.jpg


hopefully some sun later

I really think Autopia should carry flake.

That is all

Thanks for viewing
 
512, Polish Angel is great stuff, I`m really thinking about consolidating to two lines of product one them being Polish Angel, I know everyone says they are a boutique product but with results like you have let the hard work and Polish Angel shine on
 
512, Polish Angel is great stuff, I`m really thinking about consolidating to two lines of product one them being Polish Angel, I know everyone says they are a boutique product but with results like you have let the hard work and Polish Angel shine on
I have polish angel as my "premium" selection (master sealant, their sprays etc) and all free upgrade to PA for our ride of the month`s if they want to book anything (as a token of appreciation that they could be ride of the month and still acknowledge I can make their car look much better)

I plan to have the entire line by the end of the year, even if it`s just 100ml sprays...this stuff really does go a long way...I`ve been wasting the heck out of this Zirkon since last October or so and I have only killed a little past where the bottle starts to get skinnier and angle up

I honestly don`t think you can get a better looking `coating` than cosmic v2 ... from a scientific standpoint...especially when you top it with High Gloss

So Gold Zirkon as drying aid?

Wash, spray dry and walk away or wash spray dry buff ?

if you noticed I used the smaller Big Blue towel..one side was to spread and dry and the other was the buff side...then I hit the car with a fresh blue dmt for safety sake since I used so much Zirkon but it did seem I could have just walked away without the DMT but you know I was not going to risk that :)

No palm tree but we`ll let this Merlin shot slide :bigups
People thought I was crazy for using High Gloss as a drying aid so thanks for restoring my sanity by using Zirkon haha

crazy is in the eye of the beholder. I think people are crazy for NOT trying it as a drying aid!!! lol

wait till you see me use high gloss as a drying aid for cosmic shampoo, lol
 
I think I was breaking some rubber necks today on the way to work :PolishAngel:

some yahoo was admiring so hard that he almost rear ended someone on the interstate

so now I say this shine is potentially dangerous B)
 
Looks killer, like the Cuda grill. I`ll be tackling my mopars in the next month before Challengerfest.
 
Back
Top