Review: Polish Angel Glissante and Cosmic Spritz

Justins00ss

Active member
Next on the list from last week`s giveaway are Polish Angel Glissante shampoo and Cosmic Spritz spray sealant.


First up is the Glissante. Here is the description.

Polish Angel GLISSANTE Shampoo is a concentrated car wash shampoo that effectively cleans your vehicle and virtually eliminates water spotting. The pH neutral formula makes this shampoo safe and gentle on delicate paint systems. Polish Angel GLISSANTE Shampoo contains the polymers and lipids your paint needs to look shiny and glossy after every wash.

Washing our vehicle is a necessity—most enthusiasts wash their vehicles at least once a week—and with so many car wash shampoos out there, choosing the right one can feel daunting. Polish Angel GLISSANTE Shampoo is the ideal choice for increasing the gloss and shine on your paint with every wash. This unique formula not only cleans away dirt and grime, it also boosts existing paint protection to keep your car looking its best.

Polish Angel GLISSANTE Shampoo contains a 10% carnauba gel paste that increases gloss and protection like no other was formula can. Special polymers in the highly concentrated formula help soften water to virtually eliminate water spots. The carnauba content coupled with the polymers will actually help to remove around 90% of all of the water from the surface during rinsing, simplifying the entire process! The highly concentrated formula makes for an economical car wash option—only one ounce will create up to three gallons of wash solution! Polish Angel GLISSANTE Shampoo helps you keep your paint looking fresh mile after mile.






I ended up diluting it according to the instructions. Upon opening I noticed that the sent is exactly what Ray describe it as. A kind of after shave barber shop smell. Very pleasant. One thing I noticed is that it didn`t seem to foam up like I would of liked it too but non the less I proceeded with the washing.

For this test I used my personal truck. I had washed and Hydro2 it about a week ago and the beading was still strong.



I did my normal wash process and hosed the surface off as I completed a section. It seemed to clean well and rinsed easily. Now because that the truck has Hydro2 on it I am assuming that`s why it didn`t sheet water at all like stated. Not a big deal but did want to note it.

After washing.




Overall a good product but I am not one to drop a ton of coin on a soap. I will probably stick with Reset.

After drying I decided to go over the surface with Polish Angel Cosmic Spritz. This seems to a Reload/TAC systems type product.

POLISHANGEL® | COSMIC SPRITZ is the newly developed maintenance spray for GLASSCOAT™ | COSMIC.

Cosmic Spritz has the highest concentration Silica and Titanium Dioxide of all our spray products. Silica produces an extremely hard durable surface that protects against corrosion. Titanium dioxide provides extreme shine and color transparency.

Cosmic Spritz boosts the hardness of Cosmic. It also contains unique ingredients to reduce the total curing time of Cosmic from 24 hours to 12 hours when applied 1 hour after the final coat of Cosmic. Cosmic Spritz requires only a minimal amount of product to be effective. Cosmic Spritz leaves no residue on the plastic parts. Can be used as a drying aid.

To aid in the curing of Cosmic:

Apply two or more coats of Cosmic. 1-2 hours after the final coat of Cosmic is applied, apply one coat of Cosmic Spritz Total curing time for Cosmic will now be 12 hours from the application of the final coat of Cosmic. General applications:

Shake well before use Spray a very small amount onto the paint surface or into a microfiber towel Wipe until product is spread thin and evenly Remove any remaining residue with a separate microfiber towel


I followed the general applications and applied a Spritz or 2 to a panel and rubbed it in with one microfiber towel then followed behind with a dry microfiber towel. This stuff went on effortlessly and left a nice surface. It definitely has a thick consistency.



Before applying. You can see some water spots etc.





After application.



I even hit the glass with this stuff with no issues. Outside in the elements too. It wasn`t very hot but still had no problems on the dark paint. I will probably pick up another bottle once this is gone.

All done!


 
Thanks for the review Justin! I noticed Glissante didn`t foam up a lot either even at a higher dilution, but I was happy to use it because of how slick it felt. I`ll probably use it again in the future just because of the smell!

20160423_173659%2B%25281%2529.jpg


Have you tested any beading or sheeting abilities for Cosmic Spritz yet?
 
Thanks for the review Justin! I noticed Glissante didn`t foam up a lot either even at a higher dilution, but I was happy to use it because of how slick it felt. I`ll probably use it again in the future just because of the smell!

20160423_173659%2B%25281%2529.jpg


Have you tested any beading or sheeting abilities for Cosmic Spritz yet?

Thank you sir! I have not tested the beading properties yet of Cosmic Spritz. Possibly tomorrow. I polished a small area today and applied Cosmic over it.

Excellent write-up!

thank you

Nice review Justin !!!!

Thank you!
 
Justin00ss:
That very last picture in your slide show of the finished truck looks awesome and extremely shiny/glossy for doing a spray-n-wipe.
How long did it take you apply and wipe down this truck??
Thanks for taking the time to type and post your pictures.

I also assume based on your write-up that you would highly recommend the Comic Spritz to others and buy it for yourself.
 
Justin00ss:
That very last picture in your slide show of the finished truck looks awesome and extremely shiny/glossy for doing a spray-n-wipe.
How long did it take you apply and wipe down this truck??
Thanks for taking the time to type and post your pictures.

I also assume based on your write-up that you would highly recommend the Comic Spritz to others and buy it for yourself.

Your very welcome for the feedback! Glad to help out. As for time to apply it. I would say 20min tops. I will be adding this along with a couple other PA products to my arsenal. Mainly for higher end jobs and my personal GTO. Mainly due to the cost of their products.
 
Your very welcome for the feedback! Glad to help out. As for time to apply it. I would say 20min tops. I will be adding this along with a couple other PA products to my arsenal. Mainly for higher end jobs and my personal GTO. Mainly due to the cost of their products.

Most detailers I talk to end up putting these PA products on their "top shelf", which I think is a great idea. You figure once in a blue moon you`re going to have someone say they want you to use the best stuff you have and price isn`t an issue.
 
Back
Top