Your wash sponge/mitt/pad

Hey all …. so since I started detailing my own vehicles last year, I have only gotten around to using the GG MF mitts along with a couple Meg's Mitts…

As we all know they DO work… although, I am currently looking for something a little better..or the best.

I keep looking at the Incredipads and Incredimitts but what keeps me from pulling the trigger is the price alone.

I keep thinking in my mind that I can easily get 2 GG mitts for the same price or even 6 Meg's Mitts instead of just the ONE Incredimitt.

Are they THAT much better then the others? Price wise?

I do not mind spending the extra $$$$ for them if they are all that! lol

Thanks sincerely in advance!
 
The incredimitt does look interesting. Had the LC wash wedge. HATED IT! Just did not fit into certian areas of the xterra. Some of the DODO wash mitts look interesting too.
 
what do people think about poorboys microfiber chenille mits? Thinking of buying one of their package deals to get started on my microfibers and get away from megs microfibers
 
gret said:
what do people think about poorboys microfiber chenille mits? Thinking of buying one of their package deals to get started on my microfibers and get away from megs microfibers
Click to expand...

They are very good. A little square than most mitts, medium density noodles so not that heavy, with a softer and more durable cuff.
 
I'm just a novice but I think the process is more important than the sponge or mitt. For instance, a good power rinse first to get the extry crud off. Then a good soap/foam layer to dwell some. Then almost any sponge/mitt/towel super saturated in sudsy wash water. Then there's the two bucket method...or better still, the dirty sponge/mitt/towel never sees the wash water again. I like the idea of using two buckets, but the one bucket is wash water for multiple microfiber towels or mitts. The second bucket just has APC/water and as the fresh towels/mitts are used, they are tossed in the cleaning bucket. No need to worry about any grit getting back to the finish.
 
MiVor said:
I'm just a novice but I think the process is more important than the sponge or mitt. For instance, a good power rinse first to get the extry crud off. Then a good soap/foam layer to dwell some. Then almost any sponge/mitt/towel super saturated in sudsy wash water. Then there's the two bucket method...or better still, the dirty sponge/mitt/towel never sees the wash water again. I like the idea of using two buckets, but the one bucket is wash water for multiple microfiber towels or mitts. The second bucket just has APC/water and as the fresh towels/mitts are used, they are tossed in the cleaning bucket. No need to worry about any grit getting back to the finish.
Click to expand...

I will disagree here

Some mitts etc are actually sewn with fishing line (nylon) and not finished well. (cheap micro towels too)

This can scratch the paint. As well as some have cuffs/seams that are exposed
 
I have a decent supply of wash mitts. I have the Dodo Wookies Fist, the Griot's Wash Pad, some PBMG noodle mitts, BMWs SheepSkin mitt, some PBMG's old SheepSkin pad, JunkMans Green AutoZone mitt ( for wheels), and probably some others I can't think of.

My favorite all around is the BMW sheepskin mitt - the length of the "hair" is just perfect for washing and easy maintenance.

The Dodo one is nice - but you have to comb it out like it's some type of lady or something and it takes forever to dry. It also has to be hung propped open to dry - or it can rot. It also has to be hand washed and takes forever to get soap out of.

The Griot's wash pad is too big for a car - but good for a truck. The noodle mitts from AG are pretty nice and can just be washed with your towels. AutoZone mitts - forget about it on your paint.

Sponges are great for cleaning dishes.
 
The Junkman recommended green chenille style mitt worked fine with zero issues for me. I also have every Microfiber Madness wash media in existence (mitt, sponge, pad) and those are quite nice. But my new wash media is a blonde bhb with foam gun combo for dirty cars, and for the "not do dirty" wash I use the Garry Dean Air Injection "Rinseless Wash." It's my go to wash technique now. Use premium microfiber towels in this method, about 6 per car.
 
Ronkh said:
I will disagree here

Some mitts etc are actually sewn with fishing line (nylon) and not finished well. (cheap micro towels too)

This can scratch the paint. As well as some have cuffs/seams that are exposed
Click to expand...

MiVor said:
I'm just a novice but I think the process is more important than the sponge or mitt. For instance, a good power rinse first to get the extry crud off. Then a good soap/foam layer to dwell some. Then almost any sponge/mitt/towel super saturated in sudsy wash water. Then there's the two bucket method...or better still, the dirty sponge/mitt/towel never sees the wash water again. I like the idea of using two buckets, but the one bucket is wash water for multiple microfiber towels or mitts. The second bucket just has APC/water and as the fresh towels/mitts are used, they are tossed in the cleaning bucket. No need to worry about any grit getting back to the finish.
Click to expand...

It is unlikely that any nylon thread (I have a Meguiars wash brush [versa angle wide body brush] which is made from synthetic fiber) or inexpensive microfiber towel is more abrasive than attached road grit. My point was that the key is having sufficient lubricity in the wash media and not 'sanding' the surface with aggressive pressure. Additionally, a procedure so as not to reintroduce abrasive grit back to the finish.
attachment.php


http://www.autopia.org/forums/detailing-product-reviews/15736-reviewed-meguiars-versa-angle-wide-body-brush.html
 

Attachments

  • wash brush.jpg
    wash brush.jpg
    88.2 KB · Views: 93
MiVor said:
It is unlikely that any nylon thread (I have a Meguiars wash brush [versa angle wide body brush] which is made from synthetic fiber) or inexpensive microfiber towel is more abrasive than attached road grit. My point was that the key is having sufficient lubricity in the wash media and not 'sanding' the surface with aggressive pressure. Additionally, a procedure so as not to reintroduce abrasive grit back to the finish.
attachment.php


http://www.autopia.org/forums/detailing-product-reviews/15736-reviewed-meguiars-versa-angle-wide-body-brush.html
Click to expand...

You mean a nylon brush that's been discontinued?
 
I believe a soaked quality boar brush (becomes crazy soft just like your quality shaving brush) used in conjunction with a foam gun makes for the most gentle method of washing. I have used wool mitts, microfiber chenille, microfiber madness wash media...all worked ok... But this BHB/Foam gun method takes the cake.

Thanks Accumalator. I was skeptical at first, but now a convert.
 
Nylon brushes scratch clear coat paint. This could be why:

1. Meg's d/c'ed this brush.

2. No real detailer uses a nylon brush to wash a car.

3. Even quality wheel brushes are boar's hair.

Your wash media does matter. However, there is no magic wash media. There are many safe choices - including a boar's hair Montana brush on a pole.
 
I use two methods.

If my car is very dirty, I use a strong stream pre-rinse followed by foam, a soak and rinse.
A soap bucket and a rinse bucket along with a boar's hair brush (no handle) to sweep away the dirt
and grime.

If my car is slightly dirty, a soap bucket and rinse bucket, two natural sponges and high lubricity soap.
 
You must log in or register to reply here.
Back
Top