Question about SSR2.5

[fishio]

Hi all

I am about to purchase SSR 2.5 for use with my PC and was wondering if PwC blue will work as a step down polish if needed? I just want to make sure I dont need to order SSR1 as well. I already have PwC blue and would like to use that as a step down if possible. Thanks!

[JaredPointer]

While I have not used PwC blue, I have had a good deal of experience with SSR2.5. I have used the 2.5 with a polish pad and left little to no hazing, so I would think that following up with PwC would be fine.

[holland_patrick]

Double true..

[fireman03]

I also have gone from 2.5 to a lsp with great results.

[fishio]

Thanks for the help so far guys.
One more quick question. Will EX sealant bond well over top of PwC if I do indeed use PwC?

[Brenton]

2.5 -> PwC -> EX is a fine line IF you aren`t using 2.5 with wool/aggressive cut pad. If so, use SSR1 as a mediating step, or 2.5 with a finishing or polishing pad.

[fishio]

I was going to use 2.5 with a light cut pad and then follow up with PwC with a polishing pad...should I do a round of 2.5 with a polishing pad after the light cut pad?

[JaredPointer]

I was going to use 2.5 with a light cut pad and then follow up with PwC with a polishing pad...should I do a round of 2.5 with a polishing pad after the light cut pad?

After a cutting pad, it might be advisable to follow up with a less aggressive pad/polish combo to remove any hazing that could be left behind.

[hammondc]

I like SSR2.5 with edge blue then SSR1 with edge blue. Works great for me.