The instructions for NXT say wait 15 min. before removing, will that make a difference, or can I just wait until it hazes over then remove it.
The instructions for NXT say wait 15 min. before removing, will that make a difference, or can I just wait until it hazes over then remove it.
Originally posted by ptim
The instructions for NXT say wait 15 min. before removing, will that make a difference, or can I just wait until it hazes over then remove it.
15 minutes is probably a rough estimate. I`m sure your environmental conditions, e.g. temperature, humidity, etc ..., greatly effect the cure time.
It took me approx 15 minutes to apply NXT to my full sized truck by hand. Then I removed it from half of the truck, waited a few minutes, then removed it from the other half with very good results!
Interviewer: : Rock, you got anything derogatory to say about the champ?
Rocky Balboa: Derogatory? Yeah. He`s great
NXT comes off easier if you wait 10-15 minutes to remove it and 20-25 when it is 50 degrees or cooler.
I concur, I used it this past weekend and did a small test on my own. I applied to the whole car, waited 15 min, then 30, 45 and finally 60. 45 and 60 were no different but by the 30 min mark it was signifigantly easier to remove than at the 15 mark.
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks