Vinyl numbers on clear bra for HPDE/autocross

J

jmunjr

New member
I am going to a high perf driving event this weekend and I finally got Ventureshield put on the car. I did a fullhood as I will be doing enough of these events to require it.



Thing is, some of these events require numbers on the hood as well as the sides of the car.



There are temporary vinyl numbers available - here are install instructions:

Sign Specialist - Instructions for installing graphics, decals, lettering

Removal is usually carefully using a hair dyer and peeling off.



Well, how would these remove when put on Venturshield?



Any ideas?
 
As long as you aren't near any edges and don't rip it off quickly in the cold, you'll be fine. The hotter it is outside, the better.
 
Be careful when pulling off the vinyl numbers. VentureShield is soft, so you may cause gouge marks in the film when picking at the edge of the numbers when trying to take them off. My suggestion would to be to fold one of the edges on each of the numbers on to itself, so there is a small tab like edge that you can grip onto when pulling them off. Hope this makes since.



Robert
 
You must log in or register to reply here.
Back
Top