using Meguiars SwirlX with UDM

D

dpe_g35

New member
hey guys,



tomorrow ill be trying out the SwirlX by meguiar with a UDM machine, did anyone try it yet? hows the results? im not looking for a 100% swirl correction, i just really want to get rid of atleast 50% of the swirls out. what speed setting should i use? i will be using a 5.5 inch Orange CCS Smart Pad.



thanks alot!
 
Im going to be doing the same thing this weekend. Swirlx with pc7424. Im going to start out with a white lc pad on speed 4.5-5. Might go to an orange pad if need be.



others will give you sound advice, that is just how I am going to do it
 
A lot of it will depend on what kind of paint you have. I was using it with my G110 on the big Meg's Polishing pad, with some success, but I had to really work it hard. With a smaller, more cutting pad, it should work very well. What sort of car will it be on? My car has the super hard GM clearcoat, so if your car has a softer clear you might not need to put a lot of gusto into it.



Here's some things I learned about using it. if you think you've worked it in well enough, give it another pass or two, this stuff really works a long time. And if you don't get it worked out enough, it'll leave a splotch that you seriously cannot buff off. Scared the hell out of me tbh, I thought I screwed something up, but after hitting it with another quick pas or 2 it cleared up.



I've been itching to get myself some smaller more aggressive ads (probably oranges) and maybe some of the Ultimate Compound to see how that all works.
 
You must log in or register to reply here.
Back
Top