UDM 4" Pads?

M

mborner

New member
I'm considering the UDM DA polisher. I notice that the UDM ships with a 5.75" backing plate and 6 1/2" pads. Do they make backing plates for the UDM that will accommodate 4" pads?
 
alright here goes....if I miss something then let me know



--------AUTOGEEK LINKS---------

if you WANT to use the PFW (purple foamed wool)



THE PAD - Foamed Wool 3.5 inch Buffing/Polishing Pad, spot polish with Lake Country Foamed Wool Pad, wool buffing pad, small wool pad

THE ADAPTER - D.A Adapter 5/8" X 11

2.75" BACKING PLATE - 2-3/4 Hook & Loop Backing Plate



the above pad is 3.5" and a 3.5" backing plate will not work, thus you WILL have to purchase the smaller one listed above. however for all other 4" pads a 3.5" backing plate listed below will work



3.5" BACKING PLATE - 3.5" Dual Action Flexible Backing Plate- porter cable 7424 or 7336 hook and loop backing plate 3.5 inch.

the 4" pads / etc - Spot Buffing 4 inch pads - 30% thicker than the Low Profile Spot Buffs!





-----Top of The Line-----



its exactly 4 inches so make sure you center it dead on perfect on a 4" pad ;)

4" PAD HOLDER - Porter Cable Pad Holder 4"

4" FOAM Pads - Foam Pads 4"

OTHER STUFF - 4" Polisher Pads & Brushes



I think thats all :)
 
You must log in or register to reply here.
Back
Top