Sully's Detailing: 2007 DB9

[sullysdetailing]

2007 Aston Marin DB9
After I got there and took a look at the car I noticed that it had water spots on the whole car. Also there were spots on the chrome rims that had to be removed. After speaking to the owner we decided to go with a 1-step polish along with wheel polishing. We also polished the exhaust tips and cleaned the engine.

Wash:
Pinnacle Auto Bathe
Cobra MF Mitt

Clay:
DP Clay
Pinnacle Clay Lube

Wheels
DP Gel Wheel Cleaner
1'' Lug Brush
Daytona Brush
DP Wheel Glaze

Correction:
Griot Garage DA
5.5'' Tang Hydro Pad
M105

LSP:
Wolfgang Deep Gloss Paint Sealant

Before

Here are the spots on the wheels

They came off with clay

After:

 

[atkinsonair]

Thats purty!! Great work sir.

 

[Bunky]

You did a one step with M105?

Did it finish that well down without needing a final pass or did the owner did not want to pay for any more? That is, if he would pay for 2 pass would you have followed it up with M205 or other finishing polish.

 

[JohnHenry]

Nice job on a beautiful car, Shawn. But I have the same question as above.

 

[sullysdetailing]

Thats purty!! Great work sir.

Thank You

You did a one step with M105?

Did it finish that well down without needing a final pass or did the owner did not want to pay for any more? That is, if he would pay for 2 pass would you have followed it up with M205 or other finishing polish.

M105 and a Polish Pad finished down fine.

My reply to the same question on Autopia "Dave I did 2 test panels. One was M105 with tang. hydro pad and the other was M105 with tang. hydro pad and then I switched to a new pad and fallowed with M205. I then brought the vehicle outside to inspect. In the sun and the Brickman Swirl Finder there was no visible difference. So I then proceeded to do the whole car with M105 and tang. Hydro pad and M105 then wipes the car down and applied my LSP"

Nice job on a beautiful car, Shawn. But I have the same question as above.

Thank You