Suggestions on Menz IP and PO106ff

  • Thread starter Thread starter jw
  • Start date Start date
J

jw

New member
I'm about to tackle an 2005 Infiniti G35 that's black with a quite a bit of swirls. The paint looks fine froma distance but up close it's got light scratches and quite a few swirls. I have Menzerna IP and P0106ff along with LC orange, green and white pads. What do you recommend. Do I start off with IP and the orange pad or should I start with P0106ff and the orange pad. Will I be best to finish with P0106ff and the green pad or the white pad?



Thanks
 
Pictures would help a lot. But my moto is always - Start with the least aggressive polish and see if that will do it. I always want to remove as little clear as possible. So if the swirls and such are everywhere, try IP on Green pad, and then move to an orange pad with IP. And then follow the IP up with 106ff on a white pad.:waxing:



Try the IP on a green pad on part of the car and then if that'll not do it. Hit with IP on an orange pad. I have very good luck with IP on an orange pad on my Honda Civic(repainted), my brothers TL and my moms Stratus. Also, depending on time restraints; you could possibly do 2 steps with the IP on green pad... Up to you.
 
You must log in or register to reply here.
Back
Top