removing dried wax from black trim

III

97 bonneville/98 Z71
What would be an effective/safe way to achieve this? Would using an all purpose cleaner/degreaser work?

I'm looking for something that will remove the wax, not just cover it up and make the trim look pretty.


__________________
 
I assume that if I use the peanut butter approach I would have to re-wash the trim to get the peanut butter off?
 
III said:
I assume that if I use the peanut butter approach I would have to re-wash the trim to get the peanut butter off?
Yes, you would need to re-wash. Peanut oil works too and is less messy than peanut butter, but I have to agree that a Mr. Clean Magic Eraser followed by Poorboy's Trim Restorer would be my products of choice.
 
I heard of using armor all to get it off.

My friend actually did this to his sprayed on bedliner after getting some wax on the edges and it worked pretty good. I would second using a trim restorer as a follow up.
 
if you find that your getting into this alot--try PPG dx-440, wax and grease remover -- It's solvent based and comes in a gallon jug-- You can get it at Car Quest, Napa or any parts house.
 
I've been using Wax Blaster - very effective. I've also found that a degreaser and a fairly stiff nylon detail brush does the trick. (Thanks to one of my cronies on SUV World for that one.) I've also used 3M wax remover, but this can be VERY harsh. In my experience armor all, VRT, even bold & bright or trim restorer, etc...just covers the wax. To remove it requires some gentle elbow grease and a product with the strength to actually remove the wax.

Take care,
Jerry
 
Back
Top