Redwings97
New member
Well, sooner or later I will get the opportunity to detail some high end cars like the rest of you guys. LOL – BMW, Ferrari, Porsche, Mercedes,
NO – I get a 2000 Saturn station wagon!! LOL - This is owned by a really good friend here from work – it is his wife’s car. This car was really challenging with scuff marks, water spots, and swirls – See pictures of paint correction. Interior was done, but no pictures.
Look close enough in the finished pictures and you will see my black Great Dane.
Wash - 2 bucket method - PB SS&S & BS
Clay - PB S&W 50/50 w/ water and PB Clay
Exterior using PC
SSR 2.5 – CCS Orange Light cut pads – 2 passes
SSR 1 – CCS White polishing pads – 1 pass
Black Hole – foam applicator – 1 coat applied very thin almost to the point where I could not see it on the paint.
EXP – MF applicator dampened with water – 1 coat
Natty’s Red – MF applicator dampened with water – 1 coat
PB Trim restorer - Exterior trim
PB BnB - Tires and wheel wells
Interior seats, carpets and mats
PB APC – 10:1 pre-treat
Oxy clean – 2 scoops in gallon of hot water
Shop Vac to suck out water
Parked in sun with doors and hatchback open to finish drying
PB Natural Look - Dash, Console, and door panels
Off to the pictures
Wash buckets
Pictures of paint correction after 2 passes of SSR 2.5
50/50
Black hole pictures (prior to EXP & NR)
Most before and after pictures have 3 each. Sorry they are not all exactly the same. They are posted in the following order.
Before pictures taken in the shade
After pictures taken in the shade
After pictures in the sun
Misc pictures
Thanks for looking.
Trent
NO – I get a 2000 Saturn station wagon!! LOL - This is owned by a really good friend here from work – it is his wife’s car. This car was really challenging with scuff marks, water spots, and swirls – See pictures of paint correction. Interior was done, but no pictures.
Look close enough in the finished pictures and you will see my black Great Dane.
Wash - 2 bucket method - PB SS&S & BS
Clay - PB S&W 50/50 w/ water and PB Clay
Exterior using PC
SSR 2.5 – CCS Orange Light cut pads – 2 passes
SSR 1 – CCS White polishing pads – 1 pass
Black Hole – foam applicator – 1 coat applied very thin almost to the point where I could not see it on the paint.
EXP – MF applicator dampened with water – 1 coat
Natty’s Red – MF applicator dampened with water – 1 coat
PB Trim restorer - Exterior trim
PB BnB - Tires and wheel wells
Interior seats, carpets and mats
PB APC – 10:1 pre-treat
Oxy clean – 2 scoops in gallon of hot water
Shop Vac to suck out water
Parked in sun with doors and hatchback open to finish drying
PB Natural Look - Dash, Console, and door panels
Off to the pictures
Wash buckets
Pictures of paint correction after 2 passes of SSR 2.5
50/50
Black hole pictures (prior to EXP & NR)
Most before and after pictures have 3 each. Sorry they are not all exactly the same. They are posted in the following order.
Before pictures taken in the shade
After pictures taken in the shade
After pictures in the sun
Misc pictures
Thanks for looking.
Trent
