pics of boat I did
- Thread starter michaels86svo
- Start date
michaels86svo
New member
vtec92civic
New member
dayum! That thing has some sick red flake in it. Nice work man. What products were used and how long did that take you?
michaels86svo
New member
After years of trial and error I still resort back to 3M products.
1) 3M 1000 grit wet/dry
2) 3M heavy duty compound
3) 3M 1200 grit wet/dry
4) 3M Perfct It Rubbing compound (1)
5) 3M Finesse It II polish
6) Turtle Wax Ice (don't hate it-works great in some uses)
7) P21S Carnauba wax
I use only a rotary buffer with lots or experience. I've been told that I just have that touch/feel for using one.
I only wet sanded/buffed the top deck,wax the entire boat, and vacuumed. Just washed the trailer as it was in bad shape.
It took me about 7 hours.
1) 3M 1000 grit wet/dry
2) 3M heavy duty compound
3) 3M 1200 grit wet/dry
4) 3M Perfct It Rubbing compound (1)
5) 3M Finesse It II polish
6) Turtle Wax Ice (don't hate it-works great in some uses)
7) P21S Carnauba wax
I use only a rotary buffer with lots or experience. I've been told that I just have that touch/feel for using one.
I only wet sanded/buffed the top deck,wax the entire boat, and vacuumed. Just washed the trailer as it was in bad shape.
It took me about 7 hours.
vtec92civic
New member
well rotary is the only way to go when working on gel coats. I would never even think to attempt doing a boat with a PC or something like that.
So you had to wet sand . . . . . the boat came out great. Smooth work.
So you had to wet sand . . . . . the boat came out great. Smooth work.
michaels86svo
New member
Thank you.
JohnKleven
New member
WOW, what a save. Great correction work.
John
John