menzerna polish - What's the deference ?????

D

DetailingFOOL

New member
can anyone give me A guideline on when to use one

of these over the others.



po106fa - super finish nano

po87mcq - micro or final polis

po85rd



I hear a lot about 106 and 85rd, But not much talk

about 87rd, do you use the 87rd at all ????



And do you guys have any user tips that might help

a first user of these products.



Thanks.......



DetailingFool......
 
87mc has less cut than 85rd. 106 is usually done with a white polishing pad and 87mc and 85rd are used with a blue finishing pad. This is the final step in polishing and is called jeweling/burnishing the paint.
 
You can't really use these unless you have a machine, just to clarify.



106 is about a Mid/Low cut and will finish down LSP ready. The cut level is rated at 2.5.



85RD is what I like. Enough cut to take out light holograms, but finishes down very nicely. My favorite finishing polish. (1.5 cut)



87 has almost no cut. A real finishing polish, but the advantage over PO85RD is slim to none IMO. I would only get this if you plan on doing a longggg 3 step correction on a car and actually have the time to jewel it correctly. (1.0 cut)
 
Here's a Menzerna chart to answer some of your initial questions.



MenzChart.jpg
 
You must log in or register to reply here.
Back
Top