Menzerna fg400

M

Mike lambert

New member
Just a couple of quick shots of a corvette in for finest coating.
This was fg400 on a micro cut pad only, still to be polished!
I was impressed!
12b2e95a8c65ef12bbce5bad1f54590e_zpsdde58756.jpg
586af00cf6eef0352c2a4d4755f15816_zps52c490a3.jpg

After
e9d8f978eb71e0e4e8113b5176db64a7_zpsd078ffb2.jpg
c15c1453c53b8448955b2e2bde93396d_zps62cfb0eb.jpg

Thanks for looking
 
I have been very impressed with Menzerna FG400 so far! It is really is an excellent cutting compound, which is nothing new from Menzerna.
 
Is it true, with the Flex 3401, with FG400, it's better to use slower speeds(3-4) when correcting?

Is that a pink Vette?
 
SSizzlin' said:
Is it true, with the Flex 3401, with FG400, it's better to use slower speeds(3-4) when correcting?
Click to expand...

Yes, I only use Menzerna (Also HD Uno for speed jobs) an I have to say FG was tricky in the beginning but once you get the hang of it... it makes life a lot easier.

Your better off around 4 but try stepping too, for some reason it really works well. 1-2 passes with speed 3, 1-2 with speed 4 and then 1-2 with speed 6. It always seems to finish up nicely (Assuming your dialed in with the right pad though).
 
Rsurfer said:
Todd, your thoughts on M101 vrs. FG400? Besides one being smat and the other being dat. txs.
Click to expand...

M101 has more cut, FG400 has more working time, produces more gloss, finishes better, etc...

I still love M105 (more than M101), but FG400 is quickly becoming my go to. :bigups
 
You must log in or register to reply here.
Back
Top