Meg's 83 vs Menzerna IP

[skyguyz]

OK, so here we go. The combo of Menzerna IP followed by Meg's 82 wasen't cutting it to the degree I was happy with. I used Meg's #83 DACP, (right side of tape) and well it looks better? This the most aggressive I'll go short of havong a professional with a rotary remove swirls, etc.


Menzerna IP followed by Meg's 82 sun spot left side

Meg's #83 DAC sun sport right side

I'm happy with the Meg's #83 side. I think I can continue now!

PS: Thanks so much to CharlesW for all his help! :dancin

 

[Bill D]

Make sure any polishing oils from the #83/DACP aren't concealing remaining defects. Do this by spraying down the panel with isopropyl alcohol, wait a bit, I generally give it 30 secs or so, then wipe and look to see if still looks the same. Best to do this before moving on to your finishing steps so you get rid of the defects once and for all from the start.