How to re-do a teak deck hatch?

S

silvereagle

New member
I am doing a teak deck hatch that is 40x12 and the boards are 1x6.I was asking what is best to finish after sanding?I want to use a polyurathane? out in a wet enviroment and the uv exposure?what is the best product to put on? thanks
 
Teak oil only. No other coatings, just put of several coats of teak oil.

If in doubt, go to a West Marine or Boat USA store or their websites and ask them.

Grumpy
 
It is a shame that people are using teak wood. Teak is an endangered tree around the world. We should respect our environment a little more.
 
Polyurethane or varnish will not bond to teak wood. Like Ron said use teak oil after sanding.
Ron Ketcham said:
Teak oil only. No other coatings, just put of several coats of teak oil.

If in doubt, go to a West Marine or Boat USA store or their websites and ask them.

Grumpy
Click to expand...
 
I recently cleaned a teak swim platform on a Ski Nautique. Not wanting to F... it up, I called West Marine and they gave me their tech support line, best 20 minutes I've had in a while. That guy was an old veteran of boating, the marine version of Grumpy! I took every bit of his advice, do NOT sand it, clean it! West Marine carries this stuff called Te-Ka Teak Cleaner kit, $34.99, go ahead and get a couple 1.5" paint brushes too. Now, get 2 solo cups, need one for Part A and Part B, label them and the paint brushes, wet the teak, apply Part A, wait 5 minutes, apply Part B, then hose off, mine took a second round. Be sure to wear gloves and eye protection!



Let it fully dry, 24-48 hours, add Teak Oil!



Done
 
superchat said:
It is a shame that people are using teak wood. Teak is an endangered tree around the world. We should respect our environment a little more.
Click to expand...



And use ONR to save water??????
 
Any pictures of what it looks like after A & B, but before applying teak oil?
JuneBug said:
I recently cleaned a teak swim platform on a Ski Nautique. Not wanting to F... it up, I called West Marine and they gave me their tech support line, best 20 minutes I've had in a while. That guy was an old veteran of boating, the marine version of Grumpy! I took every bit of his advice, do NOT sand it, clean it! West Marine carries this stuff called Te-Ka Teak Cleaner kit, $34.99, go ahead and get a couple 1.5" paint brushes too. Now, get 2 solo cups, need one for Part A and Part B, label them and the paint brushes, wet the teak, apply Part A, wait 5 minutes, apply Part B, then hose off, mine took a second round. Be sure to wear gloves and eye protection!



Let it fully dry, 24-48 hours, add Teak Oil!



Done
Click to expand...
 
When teak is aged a bit, and you clean it and then let it totally dry, it's almost white without the teak oil added.

The Egg Harbor a partner and I had in the mid 80's (46 foot sport fisherman)had the whole bow area and down both side gunel's in teak. Boat was built in 1978. We bought it out of a divorce settlement in 85 and due to setting in a storage slip for a year, the teak was very dry.

Cleaned it, let it dry, put on 3 coats of teak oil, waiting a day between coats, and it was great for a year.

When noticed it turning a bit "white", would clean and add another coat.

Sold the boat in 87 when the price of crude went to the bottom and so did our company.

Grumpy
 
superchat said:
It is a shame that people are using teak wood. Teak is an endangered tree around the world. We should respect our environment a little more.
Click to expand...



Sustainably harvested, plantation grown teak is commonly available.



It's very easy to built with environmentally responsible lumber if one chooses to. (It's also illegal to import poached or otherwise illegally harvested lumber into the US.)





pc
 
You must log in or register to reply here.
Back
Top