How long to wait befor I wipe off product

[Jeff94z28]

I just picked up a huge order a few days ago and Im getting use to the products but I was wondering about how long it takes for each product to cure befor I wipe it off. I have the following,

AIO- Ive been letting this sit about 5 minutes befor wiping it off

UPP- About 5 minutes as well

Souveran- Havent used it yet since I havent done my own car (Im saving it for mostly shows or an occasional week of good weather)



Also how long do I work the SSR 2.5 and 1 befor I wipe it.



Thanks guys.



A little more info, this is on typical 60/70 degree days, in the shade. Sometimes sunny, usually cloudy though.

 

[usdm]

This may seem like a dumb answer, but usually

the instructions on the back labels can be of good

use. That said, here's what works for me (have

not used Souveran, so I can't speak on it):



AIO; wipe on, wipe off. No wait time is needed.



UPP: wipe on, let sit for about 10-15 mins. or

until it hazes. Key here as with almost any

other sealant is to use sparingly. Just apply a

thin enough coat to slightly distort the reflection

of the panel being worked on.



For the SSR, I find I get my best results when I

use them on warm, but not hot paint. So often

times, I will try to work the polish in direct, or

indirect sunlight.



SSR2.5 Via PC: work until it slightly dusts. I stick with

light cut pads, and run the PC at 4.5-5



SSR2.5 Via rotary: work until only a slight haze

is left on the panel. Also use light cut, and or polishing

pad, and run at speed of about 900-1200 rpms.

 

[Jeff94z28]

Thanks for the help, Dads car is tomarrow so I was just checking. To make sure I was using them correctly.



Brothers GTP is done

Moms Rav4 (what a pain in the *** to main knooks and that lower paneling is horrid)

Dads Towny tomarrow



Then finally my car this weekend hopefully.